Table of Contents
Advertisement
160 Multimedia system
Character input can be started with a control ele‐
ment and resumed with another.
When the keyboard is shown, enter the char‐
#
acters on the control element by swiping and
pressing or by tapping (touchscreen).
You can use the character input function in the
following situations, for example:
Renaming a favourite
R
Entering a telephone number
R
Entering characters on the touchscreen
Requirements:
An online connection is required for some
R
functions.
Using the keyboard
1
Input line
2
Shows suggestions during input (if available)
3
Deletes an entry
4
Deletes
Pressing briefly deletes the last character
entered
Pressing and holding deletes the entry
5
Accepts an entry
6
Enters a space
7
Changes the keyboard language
8
Switches to digits and special characters
(level 2)
ABC: switches to letters (level 1)
9
Tapping switches between upper-case and
lower-case letters
Pressing and holding switches to upper-case
letters permanently
Call up the character entry to rename a
#
favourite, for example (
/
The keyboard is shown.
Press briefly on a character key.
#
The character is entered in input line 1. Sug‐
gestions are shown in 2.
To select a suggestion: select one of the
#
entries.
If available, display additional suggestions
#
with q or r.
Resume character input.
#
To enter an alternative character: press
#
and hold a character.
Select the character.
#
To end character input: press the G but‐
#
ton.
%
The available editing functions depend on the
editing task, the language set and the charac‐
ter level.
Setting the keyboard for character entry
Multimedia system:
©
Operation
4
5
Display & operation
5
5
Keyboards
5
Confirm
Select
keyboards.
#
Select the keyboard language in the list.
Notes on personalisation
With the "Personalisation" function, various
driver-specific settings are stored.
With the help of the driver card/Fleetboard Driv‐
erCard (FB Card), up to six drivers can be identi‐
fied. The function is only available for vehicles
with the Multimedia cockpit and European digital
tachograph or Fleetboard DriverCard (FB Card).
The settings are stored automatically without
input from the respective driver. When a driver
change based on the driver card is recognised,
the
Loading profile...
message appears and the
driver-specific settings are restored again.
The following settings are stored:
Sensitivity of the steering wheel buttons
R
Display settings
R
Selected drive program
R
PPC system settings (Predictive Powertrain
R
Control)
page 159).
Settings
5
Controls
Advertisement
Table of Contents
