Table of Contents
Advertisement
Ignition lock on the cockpit
g Insert/remove the vehicle key
1 Steering wheel unlocked/radio position
2 Drive position
3 Start position
Vehicles with the ignition lock on the steer‐
ing column: when you remove the key in position
g, the steering is locked.
Switch positions of the electronic ignition
lock
Example: electronic ignition lock
1
Key
2
Start/Stop button
The ignition lock has the following switch posi‐
tions:
g The ignition and the display of the instru‐
ment cluster are off.
1 Radio position - power supply for certain
consumers.
2 Drive position - the ignition is switched on.
3 Start position
If you press start/stop button
is not depressed, the ignition lock is switched to
the next relevant switch position. If you press the
start/stop button in switch position 2, the igni‐
tion lock switches to switch position g.
If you press start/stop button
engine is running and the vehicle is stationary,
the engine is switched off.
Radio position/power supply
Requirements:
the key is in the vehicle.
R
the key battery is charged.
R
To switch the ignition lock to the radio position,
you must press button
2
once. In the radio posi‐
tion, the power supply is switched on for some
consumers.
The power supply is switched off again if one of
the following conditions is met:
you open the driver's door/co-driver's door.
R
2
you press button
twice.
R
Ignition
Requirements:
the key is in the vehicle.
R
the key battery is charged.
R
To switch on the ignition, you must press button
2
twice. When the ignition is switched on, the
indicator lamps in the instrument cluster light up.
The ignition is switched off again if one of the fol‐
lowing conditions is met:
you do not start the vehicle within 30
R
minutes.
you press button
2
once.
R
%
If the ignition is switched off automatically,
vehicle lighting switched on by the automatic
driving lights is also switched off. If neces‐
sary, switch on the vehicle lighting manually
(
page 75).
/
Ignition run-on
The ignition run-on function is only available in
combination with an electronic ignition lock.
The ignition run-on function allows you to leave
the ignition switched on and take key
the vehicle with you. This means you can leave
and lock the cab when the ignition is switched
Driving mode 199
2
when the brake
2
while the
1
out of
Advertisement
Table of Contents
