Table of Contents
Advertisement
The bed will fold down and could be damaged
or damage other components.
Fold down the bed before setting off.
#
Folding up
Move or fold the backrests of the driver's and
#
front passenger seats forwards.
If necessary, slide the driver's and front
#
passenger seats an adequate distance for‐
wards.
Lower the adjustable backrest of the bed all
#
the way.
Fold up the bed, push it against the rear panel
#
and hold it in place.
For both wall brackets one after the other,
#
use rubber mount
1
to push cover
rubber mount
1
engages.
Adjusting the angle of the berth
Pull on loop
4
to set the berth to the vertical
#
position.
To change the angle, e.g. for ventilation or to
#
hang up laundry, push clasp
set the berth to the desired position.
Folding down
Push the bed against the rear panel and hold
#
it in place.
Push cover
2
back.
#
Detach both rubber mounts
#
brackets.
Swing the bed down.
#
Setting up the safety net
& WARNING Risk of injury or death if the
Any vehicle occupant using a bed while the
vehicle is in motion cannot be restrained
properly.
#
& WARNING Risk of injury during use of
A vehicle occupant lying on the berth could
fall down and be injured.
#
2
until
Always deploy the safety net when using the bot‐
tom bed while the vehicle is in motion. Take note
of the legal requirements for the country you are
currently in before using the bed.
Before starting your journey, clip safety net
3
upwards and
#
2
%
When there is no one occupying the bottom
bed, stow the safety net under the bed. Clip
the snap hook onto the loop provided on the
left-hand edge of the safety net.
Adjusting the adjustable backrest
1
from the wall
Vehicles with (lowered) bottom beds do not have
adjustable backrests.
Driver cockpit
berth is used while the vehicle is in
motion
Use the bed only when the vehicle is
parked.
the berth
Always use the safety net when lying on
the berth.
1
onto rail
on the cab roof.
61
Advertisement
Table of Contents
