Starting Manual Regeneration Of The Diesel Particulate Filter - Mercedes-Benz Actros Operating Instructions Manual

%
Regeneration can be disabled via the multi‐
media system. Regeneration lockout is only
activated or deactivated via the Ê button
on the instrument panel on vehicles for trans‐
porting hazardous materials or with the fire-
sv shift program.
In the multimedia system, in the
#
menu, Switch menu item, press the Ê but‐
ton.
If the indicator lamp on the Ê button
lights up, regeneration is disabled.
Vehicles with ADR classification or with the fire-
sv shift program
To disable using the button: press the lower
#
button Ê on the instrument panel.
If the indicator lamp on the Ê button
lights up, regeneration is disabled.
Starting manual regeneration of the diesel
particulate filter
Controls
Only vehicles with ADR classification or with the
fire-sv shift program
Manual regeneration lasts 30 to maximum
60 minutes.
Manual regeneration can only be started under
the following conditions:
when the on-board computer has prompted
R
you to do so via a corresponding event win‐
dow.
when regeneration lockout is not activated.
R
% Manual regeneration can be started via the
multimedia system. Manual regeneration is
only started via the É button on vehicles
for transporting hazardous materials or with
the fire-sv shift program.
Safely park the vehicle and leave the engine
#
running.
While doing so, maintain a distance of at least
a metre from other vehicles, objects and all
flammable materials.
Apply the parking brake.
#
Shift the transmission to neutral positioni.
#
Remove your foot from the accelerator pedal.
#
In the multimedia system, in the
#
menu, under the
É button.
or
Vehicles with ADR classification or the fire-sv
#
shift program: press the É upper button
for approximately three seconds..
The É indicator lamp in the instrument
cluster lights up.
Driving mode 277
Controls
Switch menu item, press the