Table of Contents
Advertisement
342 Breakdown assistance
Press and hold button
3
#
ted into the front end position.
The cab has reached the forward end position
when the noise of the pump becomes louder.
Tilting the cab back into the driving position
(electro-hydraulic cab tilting system)
& WARNING Risk of accident or injury if
the cab is not locked while the vehicle is
in motion
If the cab is not locked, the following danger‐
ous situations could arise when the vehicle
decelerates:
It could tilt forwards.
R
You could lose control of the vehicle.
R
Persons in the cab could be thrown for‐
R
wards.
Persons or objects in the range of move‐
R
ment could be hit.
Ensure the following before every journey:
The cab is locked.
R
The cab is engaged in the driving position
R
and the valve lever is in the driving posi‐
tion.
The indicator lamp goes out when the
R
engine is started
Swing the valve lever on the cab tilting pump
#
into driving position 1.
Press and hold button
3
#
ted into the rear end position.
The cab will lock automatically.
Swing the flap to the right of the entrance
#
down until you hear it engage.
In the cab, press the lower section of the
#
C button.
The indicator lamp on the C button will go
out.
Check whether the º indicator lamp on
#
the instrument cluster goes out after you
start the engine. When the º indicator
lamp goes out, the cab is locked. If the º
indicator lamp does not go out, repeat the
process and tilt the cab back again.
until the cab has til‐
until the cab has til‐
Advertisement
Table of Contents
