Table of Contents
Advertisement
114 Climate control
Press the Æ button on the bed/berth
#
switch panel.
If the indicator lamp on the Æ button
lights up, the stationary air conditioning sys‐
tem is switched on.
The airflow is automatically regulated.
If necessary, set the airflow manually in the
#
climate control menu.
Only the first six blower settings can be selec‐
ted.
%
When the engine is started, the stationary air
conditioning system will switch off automati‐
cally.
Setting the switch-on time
In the multimedia system, select the
#
med times
menu item from the
trol
menu (
page 108).
/
Select the
New clim. ctrl setting
#
Set the desired values in the Time,
#
and
Temperature
menu items.
In
theFunction
menu item, select Æ for the
#
stationary air conditioning system.
Press the & button.
#
A new air conditioning control will now have
been created.
The chosen settings can be seen on the but‐
ton of the corresponding air conditioning con‐
trol in the
Programmed times
To switch on/off: press the button of the
#
desired air conditioning control.
When the air conditioning control is switched
on, the red indicator lamp on the button will
light up.
When the air conditioning control is switched
on, the yellow indicator lamp on the quick
access button ó below the multimedia
display will light up.
The stationary air conditioning system will
switch on automatically at the switch-on
times set.
For optimum air distribution in the cab, open
#
the centre and side air vents.
When the indicator lamps on the Æ button
in the multimedia system and on the addi‐
tional button on the bed/berth light up, the
stationary air conditioning system is switched
on.
The stationary air conditioning system will switch
off automatically after around two hours or when
the engine is started.
Air vents
Notes
Rigid air vents are used to ventilate the entire
cab, while it is also possible to ventilate only spe‐
cific areas such as the windscreen or footwell.
Via the adjustable centre and side air vents, you
can ventilate the driver cockpit and the front
passenger area independently of one another.
Always keep all air vents and vent grilles in the
cab free so that the air can flow into the cab
unhindered. For virtually draught-free ventilation,
Program-
move the slides of the centre and side air vents
Climate con-
to the middle and the vertical adjustment wheel
of the driver cockpit centre air vent to the very
top.
function.
Repeat
Adjusting the air vents
Centre air vents
menu.
Centre air vent in driver cockpit (example)
Turn adjustment wheel
#
open and to the left to close.
Turn adjustment wheel
#
The centre air vent should be completely
open and the vertical blades adjusted accord‐
ing to the direction of rotation.
Turn adjustment wheel
#
wards as far as the first detent position.
The horizontal blades should be adjusted
according to the direction of rotation.
2
to the I position to
2
past the I position.
1
upwards or down‐
Advertisement
Table of Contents
