Level Control - Mercedes-Benz Actros 963 Manuallines

Level control

6x2 ENA (Actros)
Air suspension
:
Travel sensor
;
Valve block (front axle) with test connection
=
Compressed air reservoir
?
Raising and lowering with the operating unit
M If possible, fill via test connection 28 on the EAPU and
adjust the level via the operating unit.
Raising and lowering without an operating unit
If the air suspension operating unit fails, you can use the test
connections to raise/lower the chassis.
In laden vehicles, pressures up to 8.5 bar are permissible. In
unladen vehicles, pressures of up to 8.5 bar at the front axle
and up to 3.5 bar at the rear axle are permissible.
42
Valve block (rear axle)
A
Travel sensor
B
Operating unit
C
Test connection (example on rear axle)
D
When you reach the end stop, cease filling
Ë
immediately.
M Fill or bleed the air suspension bellows via the test
connections D.
Towing and Recovery | Actros, Antos (Model 963), Arocs (Model 964)