Step 13: Obtain The Normal Interface And Mmu Demo - HP MC68040 User Manual

Read the README file in the mmudemo directory, which you will access next in
this demonstration procedure. The README file suggests tests you can make, in
addition to those shown in this chapter, with the demo program. These can help
you become more comfortable with use of the MMU in this emulator.
Step 13: Obtain the normal interface and MMU
demo
1 The MMU demo program is run from the normal interface of the MC68040
emulator/analyzer, not the special interface you used to run the "ecs" demo in the
first part of this chapter. If you still have the graphical user interface on screen,
choose File→Exit→Released.
If using the softkey interface, enter the command:
end release_system
2 Obtain the MMU demo directory by typing the command:
$cd /usr/hp64000/demo/debug_env/hp64783/mmudemo
3 Start the normal MC68040 emulator/analyzer with the command:
$emul700 <logical_emul_name>
The <logical_emul_name> in the command above is the logical emulator name
given in the HP 64700 emulator device table file that you used in the first
demonstration (Step 1, Substep 4 of this procedure).
4 Load the MMU demo program and start it running, as follows:
Choose File→Load→ Emulator Config ... In the file selection dialog box, select
/usr/hp64000/demo/debug_env/hp64783/mmudemo/demo.EA, and click OK.
Choose File→Load→Executable ... In the file selection dialog box, select
/usr/hp64000/demo/debug_env/hp64783/mmudemo/demo.x, and click OK.

Step 13: Obtain the normal interface and MMU demo

Chapter 1: Getting Started
29