Table of Contents
Advertisement
Chapter 12: Emulator Error Messages
Maximum argument buffer space exceeded (Error 826)
Maximum argument buffer space exceeded (Error 826)
Cause: You exceeded the space limits for argument lists.
Action: Reenter the command with less arguments, or simplify the expressions in
the arguments.
Maximum number of arguments exceeded (Error 824)
Cause: You exceeded the limit of 100 arguments per command.
Action: Reduce the number of arguments in the command.
Memory modify aborted; next address: <address> (Error 754)
Cause: One of these messages is displayed if a break occurs during processing of
the copy memory, or modify memory commands. The break could result from any
of the break conditions or could have resulted from a <CTRL> c break.
Action: Retry the operation. If breaks are occurring continuously, you may wish to
disable some of the break conditions.
Memory search aborted; next address: <address> (Error 756)
Cause: One of these messages is displayed if a break occurs during processing of
the copy memory, or modify memory commands. The break could result from any
of the break conditions or could have resulted from a <CTRL> c break.
Action: Retry the operation. If breaks are occurring continuously, you may wish to
disable some of the break conditions.
Missing option or operand (Error 313)
Cause: You have omitted a required option to the command.
Action: Reenter the command with the correct syntax. Use online help by typing
help <command>. Refer to Chapter 11, "Emulator Commands", in this manual for
further information on required syntax.
530
Advertisement
Table of Contents
