HP MC68040 User Manual page 478

Chapter 11: Emulator Commands
load
use_value Lets you specify a value to be used in place of the present content of the TC, SRP,
URP, ITT0, ITT1, DTT0, and DTT1 registers when reading the tables to determine
the reverse translations.
user_mem
Load the file into user (target system) memory hardware.
verbose
This options sets the verbose mode for the deMMUer load function. The verbose
mode shows a list of the physical address that can be translated by the deMMUer
after loading the deMMUer. If these address translations include function codes,
the function codes are shown beside the addresses (example:
000000000..003ffffff@s).
Examples
load
load
load
load demmuer verbose
See Also
display
display
help
448
sort1
configuration config3
trace
trace3
trace
mmu_translations
load