Table of Contents
Advertisement
Chapter 11: Emulator Commands
specify
from
—EXPR—
FCODE
transfer
_address
run
This option specifies that the emulator will run from either an expression or from
the transfer address when a CMB EXECUTE signal is received.
TRACE
This option specifies that a trace measurement will be taken when a CMB
EXECUTE signal is received.
until
Specifies an address where program execution is to stop. The emulator will stop
execution of your program when it reaches this address and enter the monitor.
Examples
specify
specify
See Also
cmb_execute
help
478
This is used with the specify run from command. An
expression is a combination of numeric values, symbols,
operators, and parentheses specifying a memory address. See
the EXPR syntax diagram.
The function code used to define the address space being
referenced. See the syntax diagram for FCODE to see a list of
the function codes available and for an explanation of those
codes.
This is used with the specify run from command, and
represents the address from which the program will begin
running.
run
from
START
trace
after
specify
address
1234H
Advertisement
Table of Contents
