HP MC68040 User Manual page 8

In This Book
This manual covers the HP 64783A/B emulator. All information in the manual
applies to all three Microprocessor versions, unless it is marked with the processor
name (MC68040, MC68EC040, or MC68LC040).
Part 1, "Quick Start Guide," tells you how to start using the emulator.
Part 2, "User's Guide," describes how to use the emulator/analyzer interface to
perform a variety of tasks.
Part 3, "Reference Guide," provides detailed information on emulator functions,
commands and environments.
Part 4. "Concepts Guide," discusses X Resources and the Graphical User Interface.
Part 5, "Installation and Service Guide," shows you how to install and maintain the
emulator.
viii
1. Getting Started
2. Solving Quick Start Problems
3. Using the Emulator/Analyzer Interface
4. Using the Emulator
5. Using the Emulation-Bus Analyzer
6. Making Coordinated Measurements
7. Making Software Performance Measurements
8. Configuring the Emulator (to be performed before you run a program in
emulation)
9. Solving Problems
10. Using MC68040 Memory Management
11. Emulator Commands
12. Emulator Messages
13. Setting X Resources
14. The SPARCsystem Interface
15. Microtec Language Tools used with the Emulator
16. Specifications and Characteristics
18. Installation and Service
19. Installing/Updating Emulator Firmware