Using Special Features Of The Graphical User Interface; To Choose A Pulldown Menu Item Using The Mouse (Method 1) - HP MC68040 User Manual

Using Special Features of the Graphical User Interface

Using Special Features of the Graphical User
Interface
The following paragraphs show you how to use pulldown and popup menus, the
entry buffer, action keys, and dialog boxes to compose commands and control
emulator and analyzer operation. These features are only available in the Graphical
User Interface.
This section shows you how to:
•
Choose a pulldown menu item.
•
Choose a popup menu item.
•
Place values into the entry buffer.
•
Copy and paste from the entry buffer to the command line.
•
Use action keys.
•
Use dialog boxes.
To choose a pulldown menu item using the
mouse (method 1)
1 Position the mouse pointer over the name of the menu on the menu bar.
2 Press and hold the command select mouse button to display the menu.
While continuing to hold down the mouse button, move the mouse pointer to the
desired menu item. If the menu item has a cascade menu (identified by an arrow on
the right edge of the menu pushbutton), then continue to hold the mouse button
down and move the mouse pointer toward the arrow on the right edge of the menu.
The cascade menu will display. Repeat this step for the cascade menu until you
find the desired menu item.
3 Release the mouse button to select the menu choice.
Chapter 3: Using the Emulator/Analyzer Interface
67