To show all of the valid mappings using the register overload capability of the
command, enter a command to disable the MMU, and then enable it in your
command, such as:
modify register MMU TC to 0
display mmu_translations use_value TC 8000h
To see translation details for a single logical
address
• Choose Display→MMU Translations... Then in the dialog box, click on MMU
Tables, and enter the Logical Address whose table details you want to see in the
Address box, and click ok.
• Using the command line, enter the command:
display mmu_translations tables <address>
Examples
To see how logical address 40f0h is mapped through the translation tables to its
corresponding physical address, choose Display→MMU Translations... Then in
the dialog box, click on MMU Tables, enter 40f0h in the Address box, and click ok.
Chapter 4: Using the Emulator
Using The Emulator With MMU Enabled
183