Chapter 12: Emulator Error Messages
Invalid memory map type: <type> (Error 730)
Invalid memory map type: <type> (Error 730)
Cause: You specified a memory type while mapping that is not one of the
supported types: Emul RAM, Emul ROM, Target RAM, Target ROM,
Guarded.
Action: Reenter your command, specifying only one of the five supported types,
listed above.
Invalid number of arguments (Error 308)
Cause: You either entered too many options to a command or an insufficient
number of options.
Action: Reenter the command with correct syntax. Use online help by typing help
<command>. Refer to Chapter 11, "Emulator Commands", in this manual for more
information.
Invalid occurrence count: <number> (Error 1234)
Cause: Occurrence counts may be from 1 to 65535.
Action: Reenter the command with a valid occurrence count.
Invalid option or operand (Error 300)
Invalid option or operand: <option> (Error 305)
Cause: You have specified an incorrect option to a command. <option>, if printed,
indicates the incorrect option.
Action: Use online help by typing help <command> or ? <command>. Reenter
the command with the correct syntax. Refer to Chapter 11, "Emulator Commands",
for more information.
Invalid pod number: <pod#> (Error 1253)
Cause: This error message occurs when you attempt to specify a slave clock for a
non-existent analyzer pod.
Action: Use the trace activity command to display the valid pod numbers, and use
only these numbers when entering commands.
525