HP MC68040 User Manual page 434

Chapter 11: Emulator Commands
Pulldown
Trace→Display
Trace→Display Options
Trace→Trace Spec
Trace→After ()
Trace→Before ()
Trace→About ()
Trace→Only ()
Trace→Only () Prestore
Trace→Again
Trace→Repetitively
Trace→Everything
Trace→Until ()
Trace→Until Stop
Trace→Stop
Settings→Source/Symbol Modes→Absolute
Settings→Source/Symbol Modes→Symbols
Settings→Source/Symbol Modes→Source
Mixed
Settings→Source/Symbol Modes→Source
Only
Settings→Display Modes
Settings→DeMMUer→Load from Memory
Settings→DeMMUer→Load from File
Settings→DeMMUer→Verbose
Settings→DeMMUer→Enable
Settings→Pod Command Keyboard
Settings→Simulated IO Keyboard
Settings→Command Line
404
Command Line
display trace
display trace ...
N/A (browses recall buffer for trace commands)
trace after STATE
trace before STATE
trace about STATE
trace only STATE
trace only STATE prestore anything
trace again
<previous trace spec> repetitively
trace
trace before STATE break_on_trigger
trace on_halt
stop_trace
set source off symbols off
set source off symbols on
set source on inverse_video on symbols on
set source only inverse_video off symbols on
set ...
load demmuer
load demmuer <file>
N/A (toggles the verbose mode of the DeMMUer load
function)
set demmuer on/off
display pod_command; pod_command keyboard
display simulated_io; modify keyboard_to_simio
N/A (toggles the command line)