To Enable/Disable Target System Interrupts - HP MC68040 User Manual

– Break from target program to monitor execution when the emulator
detects an attempt to write to a ROM address.
– Set the memory access size.
– Set the initial value of the stack pointer.
– Set the initial value of the program counter.

To enable/disable target system interrupts

• Choose "Yes" or "No" for the "Enable Target System Interrupts" configuration
option.
Choosing "Yes" allows target system interrupts to be received by the emulation
processor. This is useful to test whether your target system interrupt logic works
correctly after the interrupt service routines have been designed and the interrupt
vectors have been assigned.
Choosing "No" causes all target system interrupts to be ignored by the emulation
processor. You may want to disable target system interrupts if your target system
interrupt logic doesn't work correctly or isn't finished. Target system interrupts are
always ignored during execution of certain critical routines of the foreground
monitor, such as monitor entry and monitor exit, and are always ignored in the
background monitor.
Chapter 8: Configuring the Emulator
Configuring the Emulator General Items Screen
331