Performance_Measurement_Run - HP MC68040 User Manual

Chapter 11: Emulator Commands

performance_measurement_run

performance_measurement_run
This command begins a performance measurement. It causes the emulation system
to reduce trace data contained in the emulation-bus analyzer. The resulting data is
used for analysis by the performance measurement software.
The default is to process data presently contained in the analyzer.
<COUNT>
This represents the number of consecutive traces you specify. The emulation
system will execute the trace command, process the resulting data, and combine it
with existing data. This sequence will be repeated the number of times specified by
the COUNT option.
The trace command must be set up correctly for the requested measurement. For an
activity measurement, you can use the default trace command (trace counting
time).
For a duration measurement, you must set up the trace specification to store only
the points of interest. To do this, for example, you could enter:
trace only <symbol_entry> or <symbol_exit>
Examples
performance_measurement_run
performance_measurement_run
See Also
help
help
performance_measurement_end
performance_measurement_initialize
460
performance_measurement_initialize
performance_measurement_run
10