To View The Present Logical-To-Physical Mappings - HP MC68040 User Manual

signal does not affect the operation of the transparent translation or access control
registers.

To view the present logical-to-physical mappings

• Choose Display→MMU Translations. If you want to specify a logical address
range for your mappings display, choose Display→MMU Translations... Then in
the dialog box, click on MMU Mappings, and enter the desired logical address
range.
• Using the command line, enter the command:
display mmu_translations
The display will show the logical-to-physical address translations defined by the
current MMU registers and translation tables.
Examples To see the logical-to-physical mappings using the default range of logical addresses
(initially 0 through 0ffffffffh), choose Display→MMU Translations, or on the
command line, enter:
display mmu_translations
To see all of the logical-to-physical mappings for logical addresses from 0 through
0ffffh (when only the URP root pointer is enabled), choose Display→MMU
Translations.... Then in the dialog box, click on MMU Mappings, and enter Start
Address 0 and End Address 0ffffh, and click ok.
Chapter 4: Using the Emulator
Using The Emulator With MMU Enabled
181