HP MC68040 User Manual page 500

Chapter 11: Emulator Commands
SEQUENCING
restart Selects global restart. If the analyzer finds the restart qualifier while searching for a
sequence term, the sequencer is reset and searching begins for the first sequence
term.
Examples
The following example uses symbols from an imaginary program that performs a
series of tests in sequence. Occasionally test2 completes but does not start test3
(instead, it jumps directly to test 9). The following trace command would be used
to capture a trace only when the program fails to step from test2 to test 3 so you
could look at activity associated with this program failure:
display trace
trace find_sequence test1 then test2 restart test3
trigger about not range test3 thru test3 end
See Also
trace
QUALIFIER
WINDOW
help trace
470