Configuring the Emulator
This chapter describes how to configure the emulator. You must map memory
whenever you use the emulator. When you plug the emulator into a target system,
you must configure the emulator so that it operates correctly in the target system.
The configuration tasks are grouped into the following sections:
•
•
•
•
•
•
•
The simulated I/O feature and configuration questions are described in the
Simulated I/O User's Guide.
The interactive measurement configuration options are described in this chapter,
and additional information is given in Chapter 6, "Making Coordinated
Measurements".
302
Using the configuration interface.
Setting up the emulation monitor.
Mapping memory.
Modifying the general configuration items.
Selecting analyzer trace options.
Configuring simulated I/O.
Specifying connections for interactive measurements.