Table of Contents
Advertisement
Chapter 8: Configuring the Emulator
Using the Configuration Interface
To start the configuration interface
• Choose Modify→Emulator Config... from the emulator/analyzer interface
pulldown menu.
• Using the command line, enter the modify configuration command.
The configuration interface top-level dialog box (see the following example) is
displayed.
The configuration sections that are presented depend on the hardware and the
features of your particular emulator.
The configuration interface may be left running while you are using the
emulator/analyzer interface.
If you're using the Softkey Interface from a terminal or terminal emulation
window, you don't get a dialog box from which to choose configuration sections;
however, you have access to the same configuration options through a series of
configuration questions.
304
Advertisement
Table of Contents
