Table of Contents
Advertisement
Glossary
Absolute Count
in the trace list count column, an absolute count indicates the total
count accumulated between the displayed state and the trigger state.
For example, an absolute time count shown beside trace memory line
number 100 indicates the elapsed time between capture of the trigger
state and capture of state 100.
Absolute File
a file consisting of machine-readable instructions in which absolute
addresses are used to store instructions, data, or both. These are the
files that are generated by the compiler/assembler/linker and are loaded
into HP 64700 Series emulators.
Access Breakpoint
a break from execution of your target program to execution of the
emulation monitor when the emulator detects an access violation, such
as an attempt to write to ROM or guarded memory space. The same
effect can be obtained for an emulation break due to trigger recognition
within the emulation-bus analyzer, or due to a signal from an external
device supplied over the CMBT or the rear-panel BNC. Access
breakpoints do not obtain immediate transfer to the monitor program.
Several instruction cycles may be executed after the access violation
occurs before execution begins in the monitor. Refer to Chapter 4,
"Using the Emulator", for details of how to use breakpoints, and effects
of their use on execution of your target program. Also, refer to
Execution Breakpoints in this glossary.
733
Advertisement
Table of Contents
