HP MC68040 User Manual page 745

4 Start the Graphical User Interface by entering the emul700 command and giving
the logical name of the emulator as an argument to the command, as in
$HP64000/bin/emul700 <logical_name> &
or
emul700 <logical name> &
if $HP64000/bin is in your path.
If you are running the X server, if the Graphical User Interface is installed, and if
your DISPLAY environment variable is set, the emul700 command will start the
Graphical User Interface. Otherwise, emul700 starts the Softkey Interface.
You should include an ampersand ("&") with the command to start the Graphical
User Interface as a background process. Doing this frees the terminal window
where you started the interface so that the window may still be used.
5 Optionally start additional Graphical User Interface windows into the same
emulation session by repeating the previous step.
You can also choose to use the Softkey Interface under X Windows, but you must
include a command line argument to emul700 to override the default Graphical
User Interface. Start the Softkey Interface by entering
emul700 -u skemul <logical name>.
Example Suppose you have discovered that the logical name for a 68040 emulator connected
to the LAN is "m68040". To start the Graphical User Interface and begin
communicating with that emulator, enter (assuming your $PATH includes
$HP64000/bin)
emul700 m68040
After a few seconds, the Graphical User Interface Emulator/Analyzer window
should appear on your screen. The window will be similar to the following:
Chapter 19: Installation and Service
Verifying the Installation
715