Table of Contents
Advertisement
Chapter 4: Using the Emulator
Accessing Processor Memory Resources
To display memory in long word format
• Choose Display→Memory→Hex()→long. If you want to include a line range or
starting point for your memory display in your command, enter it into the entry
buffer before you execute this command.
• Using the command line, display a range of memory in long word format by
entering:
display memory <lower> [ thru <upper>] long
To format the memory listing as a single column, add the keyword absolute before
the data type in the display memory command. To format the memory listing as
multiple columns, add the keyword blocked before the data type in the display
memory command.
Example
Display the processor's interrupt vector table:
display memory 0 thru 3ffh absolute long
142
Advertisement
Table of Contents
