Table of Contents
Advertisement
Chapter 19: Installation and Service
Installing Hardware
Step 1. Install optional memory modules on Deep
Analyzer card, if desired
Observe antistatic precautions
With no optional memory modules installed on the deep analyzer card, the trace
memory depth is 8K. If you are going to use the deep analyzer with this default
trace memory depth, skip this step and proceed to Step 2 of this installation
procedure.
1 Determine placement of the optional memory modules. Two types of modules may be installed:
256-Kbyte (HP 64172A), and 1-Mbyte (HP 64172B). Either module type may be installed in the banks
on the analyzer card. Do not use HP 64171A/B or HP 64173A memory modules; they are too slow.
If you install no memory modules, the deep analyzer will have 8K maximum memory depth.
If you install four 256-Kbyte memory modules, the analyzer will have 64K maximum memory depth.
If you install four 1-Mbyte memory modules, the analyzer will have 256K maximum memory depth.
If you install a combination of 256-Kbyte memory modules and 1-Mbyte memory modules, the analyzer
will have 64K maximum memory depth. All four connectors must have memory modules installed
before the analyzer depth will be increased.
672
Advertisement
Table of Contents
