Table of Contents
Advertisement
Chapter 11: Emulator Commands
QUALIFIER
data
This specifies that the expression that follows is a data value on the emulation
processor data bus.
—EXPR—
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying an address, data, or status value. See the EXPR syntax
diagram.
long_aligned
Causes a mask to be applied to the address to force it to a long word boundary
(least significant hex digit is 0, 4, 8, or C). This is necessary because the
emulation-bus analyzer may not otherwise see the address on the address bus due to
the way the processor fetches instructions.
not
This specifies that the analyzer search for the logical "not" of the specified range or
state, that is addresses not in the specified range or an address not in the specified
state.
or
This option allows you to specify multiple states to be captured during a trace
measurement.
range
This indicates a range of addresses to be specified (—EXPR— thru —EXPR—).
status
This specifies that the expression following, or status word, is a status value for the
processor.
<STATUS>
This prompts you to enter a status value in the command line. Status values can be
entered from softkeys or typed into the keyboard. Numeric values may be include
symbols, operators, and parentheses. See the EXPR syntax diagram. Refer to
Chapter 5, "Using the Emulation-Bus Analyzer", for a list of predefined status
equates that cover common processor operations.
464
Advertisement
Table of Contents
