End - HP MC68040 User Manual

end

You can end the emulation session and leave the emulator in one of three states.
•
•
•
Pressing CNTL d performs the same operation as pressing end .
Pressing CNTL \ or CNTL | performs the same as end release_system .
end
If the command is specified without any options, two different things can occur.
What occurs depends on whether the interface instance being ended is the only one
currently executing. If it is, then this command ends the interface, but leaves the
emulator in a continue state. The interface, if restarted, will reload the last
configuration used.
If the interface instance is one of several into the same emulation session, then the
end command ends the interface instance where the end is issued. Other interface
instances into the same emulation session are not affected.
locked
This option allows you to stop all active instances of an emulator Softkey Interface
session in one or more windows or terminals. When the emulation session ends,
control returns to the UNIX shell, but the emulator is still locked to your user id
and is not available to others.
release_system
This option stops all instances of the Softkey Interface in one or more windows or
terminals. The emulation system is released for other users. If you do not release
the emulation system, others cannot access it.
You can exit the interface and leave the emulator in a continue state which
allows you to re-enter the emulation session.
You can exit the interface and leave the emulator in a locked state so that it
cannot be accessed by other users.
You can exit the interface and release the emulator for use by others.
Chapter 11: Emulator Commands
end
439