Festo CPX-P-8DE-N Series Description page 39

2. Mounting and dismantling
1
Module block 1:
Bus nodes and
CPX-EA modules
(non-intrinsically
safe wiring)
2
Module block 2:
CPX-P modules
for non-intrinsic-
ally safe wiring -
only 1 module
here
3
Module block 3:
CPX-P modules
for intrinsically
safe wiring (...-IS
- only 1 module
here)
4
Insulating plate
Fig. 2/1: Configuration of the electronics modules for a CPX terminal (-P)
Festo P.BE-CPX-P-EA-EN en 1209NH English
1 2 3
– Only the metal interlinking blocks specified in the technic-
al data section are permitted for CPX-P modules (
tion A.1.2; mechanical characteristic values).
For current information
– Permitted pneumatic modules, CPX-EA modules and bus
nodes Tab. 0/1.
For current information
– The CPX terminal (-P) has a maximum address capacity of
64 byte inputs and 64 byte outputs.
If the product is expanded, make sure that the maximum ad-
dress capacity is not exceeded. Additional restrictions can
apply for certain bus nodes. Observe the rules specified in
the bus node description if applicable.
4
www.festo.com/catalogue.
www.festo.com/catalogue.
sec-
2-5