Behaviour During The Switch-On Phase (Startup Phase); Normal Operating Status - Festo CPX-P-8DE-N Series Description

3. Input module CPX-P-8DE-N-...

3.4.4 Behaviour during the switch-on phase (startup phase)

Status Channel
LED error
LED
Tab. 3/44: Behaviour during the switch-on phase

3.4.5 Normal operating status

Normal operating status for operating mode A - digital input (Namur)
Status Channel
LED error LED
In accord-
ance with
replace-
ment
value
depending on
1)
error
1)
LED illuminates or flashes, dependent on error (
pressed by parameterisation (
Tab. 3/45: Normal operating status - operating mode A
Festo P.BE-CPX-P-EA-EN en 1209NH English
Module PII Event/status
error
LED
0 Startup phase, switch on electronic voltage
500 ms
Module PII, bit in ...
error LED
Byte 0
0
0
Re-
place-
ment
value
Tab. 3/22 and Tab. 3/23).
Byte 1 Byte 2 ... 9
0 –
0 –
1 –
Tab. 3/48). The display of errors can be sup-
Event/status
Input signal LOW
Input signal HIGH
Input signal outside the
permissible range
(e. g. short circuit or wire
break)
3-57