Instructions For Parameterising The Input Module Cpx-P-8De-N - Festo CPX-P-8DE-N Series Description

3. Input module CPX-P-8DE-N-...

3.4.3 Instructions for parameterising the input module CPX-P-8DE-N..

1
Module-specific
parameter (rep-
resented switch
position = pre-
setting)
2
Module-specific
error
Fig. 3/8: Principle of error handling and parameterisation for CPX-P-8DE-N.. - part 1
3-54
Please note that some parameters are only available in the
extended process image (
Parameterisation of diagnostic behaviour
The following parameters affect the transmission and display
of errors:
– Parameter monitoring
– Short circuit monitoring
– Wire break monitoring
– Limit value monitoring
The following images show the effect of possible parameter
settings (displayed in the image as switches).
Error message to
the bus node
Parameter
0 1
monitoring
Error no. 29
Parameterisa-
tion error
Tab. 3/18).
Channel
error LED
Module error
LED
Festo P.BE-CPX-P-EA-EN en 1209NH English
1
2