Parameterisation Via Software (Method 2A); Parameterisation With The Handheld (Method 2B) - Festo CPX-FB32 Manual

2. Commissioning

2.3.3 Parameterisation via software (method 2a)

2.3.4 Parameterisation with the Handheld (method 2b)

2-36
With the CPX Maintenance Tool (CPX-FMT), you can
parameterise the CPX terminal with a PC via Ethernet.
The CPX-FMT is available in the internet at:
– www.festo.com/fieldbus.
The Handheld offers menu-orientated access to
parameterisation without configuration software.
Information on operating the Handheld can be found in the
relevant description.
Note
The last parameterisation received in the CPX terminal is
always valid.
The CPX terminal can only be parameterised if the system
parameter "System start" has the setting "System start with
default parameterisation and current CPX expansion".
In this case, the standard parameter settings are valid in the
CPX terminal after Power On.
Note
If the system parameter "System start" has the setting
"System start with saved parameterisation and saved CPX
expansion", modified parameter settings in the CPX
terminal will become valid immediately after Power On.
Festo P.BE-CPX-FB32-EN en 1111a