3. Commissioning
3.7.1 Parameter and signal display with the operator unit CPX-MMI-1
1
1
Module identifier in main menu
(here at position 1)
Fig. 3/1: Modul identifier of input module CPX-F8DE-P on operator unit
Festo P.BE-CPX-F8DE-P-E N en 1610a English
The universal operator unit CPX-MMI-1 offers convenient
functions that support you during the commissioning pro
cess. With the operator unit, you can view the CPX module
parameters and you can change them if necessary. The
PROFIsafe parameters of the input module cannot be influ
enced using the operator unit. This is for technical safety
reasons.
General information on the operator unit and about commis
sioning of the CPX terminal using the operator unit can be
found in the description P.BECPXMMI1...
Knowledge of the basic functions of the operator unit are
assumed in the following.
The main menu of the operator unit displays the name [F8DI-P
Input Module Safety] for the input module.
In the header on the operator unit, the short text message
[F8DI-P] is displayed. An example is shown in the diagram
below:
OK
2
Module identifier in the header of the
system sub-menu for a module
2
3-11