Festo CPX-P-8DE-N Series Description page 65

3. Input module CPX-P-8DE-N-...
Festo P.BE-CPX-P-EA-EN en 1209NH English
During configuration these two bytes (low byte, high byte)
must be consolidated into one word (16 bit) in the control
system. The low byte and high byte location is to be arranged
in a different manner for various control systems.
Some CPX bus nodes provide a parameter which allows the
process value display for analogue values to be set globally
( bus node description, parameter analogue process value
display).
Set the parameter according to the mode of operation of
•
the control system used (
Additional information regarding configuration and address
allocation can be found in the bus node description. Addition-
al information regarding counters and frequency measure-
ment can be found in section 3.3.5 and 3.3.6.
bus node description).
3-15