Table of Contents
Advertisement
Contents and general instructions
Possible incorrect application
X
The following CPX bus nodes and the CPX-FEC with the revi-
sions specified here are required for operating CPX-P mod-
ules:
CPX bus node/CPX−FEC
CPX−FB11 (DeviceNet)
CPX−FB13 (PROFIBUS)
CPX−FB32 (EtherNet/IP)
CPX−FB33 (PROFINET IO)
2)
CPX−FEC
(Modbus/TCP)
1)
Revision (Rev) see rating plate
2)
Only in the Remote I/O Ethernet operating mode
Tab. 0/2:
Bus node revisions
Up-to-date information regarding components, modules and
bus nodes that are permitted for variant P CPX terminals can
be found in our catalogue (
–
Operation of CPX-P modules in combination with incom-
patible interlinking blocks (e.g. interlinking blocks in
plastic version CPX-GE-EV-...) is impermissible.
–
Operation of CPX-P modules in combination with pneu-
matic modules, CPX-EA modules and bus nodes which are
not approved for use with CPX-P modules is impermiss-
ible (
www.festo.com/catalogue).
–
Operation of CPX-P modules that are designed for intrins-
ically safe circuits with connection blocks that are de-
signed for non-intrinsically safe circuits is impermissible.
1)
Required revision
from Rev 23
from Rev 28
from Rev 18
from Rev 20
from Rev 21
www.festo.com/catalogue).
Festo P.BE-CPX-P-EA-EN en 1209NH English
Advertisement
Table of Contents
