1. Overview and connection technology
M12 connection block
...CPX-P-AB-4xM12-4POL-
Terminal connection block
CPX-P-AB-2xKL-8POL-...
1-8
Connecting and disconnecting the cable
Please observe the maximum permissible number of mating
cycles and assembly operations for the components used
(
technical data in appendix A).
In order for the completely assembled modules with M12
connection blocks to comply with protection class IP 65:
Only use appropriate plug connectors for connection.
•
Plug connectors from the Festo range of accessories are
appropriate for this purpose
(
www.festo.com/catalogue).
Tighten the union nut of the plug connector – tightening
•
torque › 0.5 Nm.
Seal any unused sockets with protective caps ISK-M12
•
(accessories) – tightening torque › 0.5 Nm.
In order to ensure a secure contact for these connection
blocks:
Only use appropriate terminal strips for connection. Plug
•
connectors and terminal strips from the Festo range of
accessories are appropriate for this purpose
(
www.festo.com/catalogue).
For plug connectors with screw terminal connection: Use
•
suitable wire end sleeves for connection.
Only connect one conductor for each spring-loaded ter-
•
minal or screw terminal.
Festo P.BE-CPX-P-EA-EN en 1209NH English