Parameterisation With Rsnetworx (With Standard Eds) - Festo CTEU-DN Description, Functions And Maintenance

4. Commissioning
Method
Parameterisation
via the configurati-
on program
(e.g. RSNetWorx)
Parameterisation
via the scanner
(automatic restore
after restart, Confi-
guration Recovery
via QuickConnect
and ADR)
Parameterisation
via the user pro-
gram (communica-
tion and program-
ming via explicit
messaging)
Tab. 4/15: Methods of parameterisation

4.3.2 Parameterisation with RSNetWorx (with standard EDS)

4-12
Description
Parameters set via the
configuration program and
direct transmission to the
DeviceNet participant,
local saving in the bus
node CTEU-DN
Parameters set via the con-
figuration program and
transmission to the
scanner:
The parameters are trans-
mitted from the scanner to
the DeviceNet participant
after every restart ("Power
On").
Parameterisation via expli-
cit messaging, parameters
are saved in the PLC
RSNetWorx enables you to parameterise using the
"Parameters" tab of the DeviceNet participant.
This requires the EDS file of the DeviceNet participant to be
contained in the EDS library
Benefits
Fast, simple parame-
trizing during com-
missioning for testing
the parameters
Parameters are reloa-
ded automatically
after every restart and
are therefore also re-
tained if the device re-
placed
Parameters are reloa-
ded automatically
after every restart and
are therefore also re-
tained if the device re-
placed
see Section 3.2.4.
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
Disadvantages
Parameters (locally sa-
ved data) are lost after
a restart or device re-
placement
(For information on de-
vice replacement
Section 2.3)
Requirement:
The scanner must sup-
port ADR
Requirement:
User program required