Festo CPX-P-8DE-N Series Description page 100

3. Input module CPX-P-8DE-N-...
Error Handheld display
no.
29 [Fault in parametrizing]
55 [Invalid process value]
1)
The module registers the corresponding error depending on parameterisation.
2)
Standard CPX error with product-specific error description
3)
In operating mode B (counter) this message occurs upon reaching the respective limit value (also
refer to the parameter description in Tab. 3/32 and Tab. 3/33).
Tab. 3/40: Error elimination
3-50
Error description
Fault in parametrisation
Parameterisation implaus-
ible;
the channel continues to op-
erate with the old parameter
setting; the process status
refers to this parameter
status
1)2)
Invalid process value
End of the counting range has
been reached; informative
(no error)
Error elimination
1)
•
Check the parameterisa-
tion measures conducted
and, if necessary, conduct
the parameterisation pro-
cess again with the correct
parameters (valid paramet-
ers section 3.3.9).
•
none; error message for in-
formation purposes
Festo P.BE-CPX-P-EA-EN en 1209NH English