Infineon Technologies CYPRESS Traveo Series Manual page 291

Page Section
13
3: Product Description
3.2. Product
Description
13
3: Product Description
3.2. Product
Description
Document Number: 002-10634 Rev. *J
Feature: Multi-Functional Serial (MFS)
Error)
Some ports of MFS have the dedicated I/O for I
See Port description list in detail.
2
When the voltage supply of I C interface is 5.0 V, it cannot use the I/O cells of 3.3 V voltage supply for the I
terminal.
CTS/RTS is not mounted (hardware flow control is not supported for this series.)
Correct)
Only 2 ports of MFS have the dedicated I/O for I
See I 2 C timing in 9.1.4.6 Multi-Function Serial in detail.
2
The I C is not designed to be hot swappable.
CTS/RTS is not mounted (hardware flow control is not supported for this series.)
Feature: Hyper BUS I/F
Error)
The following register is not supported and cannot be used.
− Controller Status Register (HYPERBUSIn_CSR)
− Interrupt Status Register (HYPERBUSIn_ISR)
− Write Protection Register (HYPERBUSIn_WPR)
− Test Register (HYPERBUSIn_TEST)
Correct)
The following register is not supported and cannot be used.
− Controller Status Register (HYPERBUSIn_CSR)
− Interrupt Enable Register (HYPERBUSIn_IEN)
− Interrupt Status Register (HYPERBUSIn_ISR)
− Write Protection Register (HYPERBUSIn_WPR)
− Test Register (HYPERBUSIn_TEST)
Change Results
2
C.
2 C.
S6J3350 Series
2
C
Page 290 of 307