1. Manuals
  2. Brands
  3. Infineon Technologies Manuals
  4. Microcontrollers
  5. CYPRESS Traveo Series
  6. Manual

Infineon Technologies CYPRESS Traveo Series Manual

32-bit microcontroller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Please note that Cypress is an Infineon Technologies Company.
The document following this cover page is marked as "Cypress" document as this is the
company that originally developed the product. Please note that Infineon will continue
to offer the product to new and existing customers as part of the Infineon product
portfolio.
Continuity of document content
The fact that Infineon offers the following product as part of the Infineon product
portfolio does not lead to any changes to this document. Future revisions will occur
when appropriate, and any changes will be set out on the document history page.
Continuity of ordering part numbers
Infineon continues to support existing part numbers. Please continue to use the
ordering part numbers listed in the datasheet for ordering.
www.infineon.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CYPRESS Traveo Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Infineon Technologies CYPRESS Traveo Series

Summary of Contents for Infineon Technologies CYPRESS Traveo Series

  • Page 1 Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio.
  • Page 2 S6J3350 Series 32-bit Microcontroller ™ Traveo Family The Traveo™ family expands the company’s automotive applications, scalability and high performance into one line-up and at the same time adds new features to fulfill the latest requirements of the automotive industry. Based on the powerful Arm ®...

  • Page 3: Table Of Contents

    S6J3350 Series Table of Contents 1. Overview ................ 3 Remark ..............44 Overview ..............3 7. Port Configuration ............45 Document Definition ..........3 Resource Input Configuration Module ....45 2. Function List ..............4 Port Output Function Configuration ...... 135 Function List ..............

  • Page 4: Overview

    S6J3350 Series 1. Overview Overview S6J3350 is a microcontroller series which is to be applied to automotive systems representative of body and gateway. Document Definition The related documents of S6J3350 are as follows: Table 1-1: Document Definition Document Type Definition Primary User Document Code This document.

  • Page 5: Function List

    S6J3350 Series 2. Function List Function List This table shows the functions which are implemented in S6J3350 series. Table 2-1: Function List Function Description Remarks CPU core Arm Cortex R5F Available Available Available Available Endian Little endian Core clock frequency 240 MHz HPM bus frequency 200 MHz...
  • Page 6 S6J3350 Series Function Description Remarks Source clock timer 4 ch Available External interrupt 24 ch Internal interrupt 512 vectors DDR HSSPI 1 ch A type of Quad SPI See the AC Hyper BUS 1 ch specification on 9.1.4.16 Multi-function serial interface 12 ch CAN-FD 8 ch...

  • Page 7: Optional Function

    S6J3350 Series Optional Function Basic Option 2.2.1 This figure shows the optional function and the part number relations of the series. Figure 2-1: Option and Part Number for S6J3350 Series Ordering options 7 digit Revision: Digit Description Fixed Operation frequency of embedded Program Flash and CPU, Fixed Stabilization time for sub oscillator Fixed TCFLASH Sector Write Permission and Data Retention after Reset Leakage current improvement...
  • Page 8 S6J3350 Series 2.2.2 ID is specified for each function digit and revision which is defined at Figure 2-1. Function Digit Revision Chip ID JTAG ID S,U,T,V 0x10122100 0x1000B5CF D, E 0x10122200 A,C,E,G 0x10128100 D, E 0x10128200 B,D,F,H 0x10120100 D, E 0x10120200 Restriction 2.2.3...
  • Page 9 S6J3350 Series Function TEQFP176 TEQFP144 EINT0_4, EINT1_1 EINT1_4, EINT1_5 EINT2_1, EINT2_2 EINT2_4, EINT3_1 EINT3_2, EINT3_4 EINT4_2, EINT4_4 EINT5_4, EINT5_5 EINT6_1, EINT6_4 EINT1_4, EINT1_5 EINT7_1, EINT7_4 EINT2_1, EINT2_2 EINT8_1, EINT8_4 EINT3_2, EINT4_2 EINT8_5, EINT9_1 EINT5_4, EINT5_5 EINT9_2, EINT10_1 EINT6_4, EINT7_1 EINT10_2, EINT10_4 EINT7_4, EINT8_4 EINT10_5, EINT11_2 EINT8_5, EINT9_1...

  • Page 10: Product Description

    S6J3350 Series 3. Product Description Overview This chapter explains the product features of S6J3350 series. The description of this chapter should precede the duplicated description on Traveo™ Platform Hardware Manual. Product Description The table shows features. Table 3-1: Product Features Feature Description 40 nm CMOS technology with embedded FLASH...
  • Page 11 S6J3350 Series Feature Description See the Traveo™ Platform Hardware Manual in detail. Hardware watchdog function stops during PSS mode. In the related register of HWDG_CFG, the Hardware watchdog ALLOWSTOPCLK is always read as 1 (HWDG_CFG.ALLOWSTOPCLK=1). The product series doesn’t support Watchdog Counter Monitor Output port. (Related register and internal circuit is implemented.) See the Traveo™...
  • Page 12 S6J3350 Series Feature Description Embedded Program Flash can be accessed with 0-wait-cycle if CPU frequency is 80 MHz or less. 0-wait-cycle: 80 MHz or less. 1-wait-cycle: 160 MHz or less. 2-wait-cycle: more than 160 MHz. Work Flash can be accessed with 0-wait-cycle if CPU frequency is 12.5 MHz or less. 6-wait-cycle: 80 MHz or less.
  • Page 13 S6J3350 Series Feature Description See the Traveo™ Platform Hardware Manual in detail. Base Timer A unit consists of a pair of 16bit base timers. 32 units, that is, 64 channels of base timers are available. Reload Timer See the Traveo™ Platform Hardware Manual in detail. I/O Timer See the Traveo™...
  • Page 14 S6J3350 Series Ethernet 3.2.1 The following functions are not supported. Functions Remarks External FIFO Interface Additional Low Latency TX FIFO Interface for DMA configurations MAC Transmit Block - half-duplex - collision - back pressure MAC Filtering Block - external address match - Wakeup On Lan Energy Efficient Ethernet support LPI Operation in Cadence IP...

  • Page 15: Package And Pin Assignment

    S6J3350 Series 4. Package and Pin Assignment Pin Assignment Alphabets with pin numbers are signs specify I/O circuit type. TEQFP-208 Pin Assignment 4.1.1 Figure 4-1: TEQFP-208 (S6J335xKyz *1) VCC53 ● DVSS EINT0_1 MAD1 P0_00 P1_24 AN46 EINT14_4 PPG9_TOUT2_0 SCK9_0 SCL9 SIN1_0 EINT1_0 MAD2...
  • Page 16 S6J3350 Series TEQFP-176 Pin Assignment 4.1.2 Figure 4-2: TEQFP-176 (S6J335xJyz *1) VCC53 ● DVSS EINT0_1 MAD1 P0_00 P1_24 AN46 EINT14_4 PPG9_TOUT2_0 SCK9_0 SCL9 SIN1_0 EINT1_0 MAD2 P0_01 P1_23 AN45 EINT20_0 PPG9_TOUT0_0 SIN9_0 SCL1 SCK1_0 EINT4_1 MAD3 P0_02 P1_22 AN44 EINT13_4 PPG8_TOUT2_0 TX6_0 SCS80_0...
  • Page 17 S6J3350 Series TEQFP-144 Pin Assignment 4.1.3 Figure 4-3: TEQFP-144 (S6J335xHyz *1) VCC53 ● DVSS EINT0_1 MAD1 P0_00 P1_24 AN46 EINT14_4 PPG9_TOUT2_0 SCK9_0 SCL9 SIN1_0 EINT1_0 MAD2 P0_01 P1_23 AN45 EINT20_0 PPG9_TOUT0_0 SIN9_0 SCL1 SCK1_0 EINT4_1 MAD3 P0_02 P1_22 AN44 EINT13_4 PPG8_TOUT2_0 TX6_0 SCS80_0...

  • Page 18: Package Dimensions

    S6J3350 Series Package Dimensions TEQFP208 4.2.1 Figure 4-4: TEQFP208 Package Type Package Code TEQFP 208pin LEW208 E3 E2 EXPOSED PAD BOTTOM VIEW 0.20 C A-B D 0.20 C A-B D TOP VIEW DETAIL A GAUGE PLANE SEATING PLANE θ 0.08 C SECTION A-A' 0.08 C A-B...
  • Page 19 S6J3350 Series TEQFP176 4.2.2 Figure 4-5: TEQFP176 Package Type Package Code TEQFP 176pin LEV176 E3 E2 EXPOSED PAD 0.20 C A-B D 0.20 C A-B D TOP VIEW BOTTO M VIEW DETAIL A GAUGE PLA N E SEATI N G PLA N E θ...
  • Page 20 S6J3350 Series TEQFP144 4.2.3 Figure 4-6: TEQFP144 (0.5mm Pitch) Package Type Package Code TEQFP 144pin LEX144 E3 E2 EXPOSED PAD 0.20 C A-B D 0.20 C A-B D BOTTOM VIEW TOP VIEW DETAIL A θ GAUGE PLANE SEATING PLANE 0.08 C SECTION A-A' 0.08 C A-B...
  • Page 21 S6J3350 Series Figure 4-7: TEQFP144 (0.4mm Pitch) Package Type Package Code TEQFP 144pin LEK144 EXPOSED PAD BOTTOM VIEW 0.20 C A-B D 0.20 C A-B D TOP VIEW DETAIL A GAUGE θ PLANE SEATING PLANE 0.08 C SECTION A-A' 0.08 C A-B DETAIL A SIDE VIEW...

  • Page 22: Io Circuit Type

    S6J3350 Series 5. IO Circuit Type I/O Circuit Type This section explains I/O circuit types. Type Circuit Remarks General-purpose I/O port − Pull-up control Output 2 mA, 5 mA, 6 mA or 15 mA selectable − 50 kΩ with pull-up resistor control −...
  • Page 23 S6J3350 Series Type Circuit Remarks General-purpose I/O port with analog input − Pull-up control Output 1 mA, 2 mA or 5 mA selectable − 50 kΩ with pull-up resistor control − Digital output 50 kΩ with pull-down resistor control − CMOS hysteresis input −...
  • Page 24 S6J3350 Series Type Circuit Remarks JTAG_TDI/TMS/TCK − 50 kΩ with pull-up − TTL input − JTAG_TDO − Output 5 mA − RSTX input − 50 kΩ with pull-up − CMOS hysteresis input − CMOS hysteresis input − CMOS-hys input General-purpose I/O port with analog input −...
  • Page 25 S6J3350 Series Type Circuit Remarks Sub oscillation I/O shared General-purpose I/O port − Pull-up control Output 1 mA, 2 mA or 5 mA selectable − 50 kΩ with pull-up resistor control − Digital output 50 kΩ with pull-down resistor control −...

  • Page 26: Note

    S6J3350 Series Type Circuit Remarks General-purpose input port − Pull-up conrol 50 kΩ with pull-up resistor control − 50 kΩ with pull-down resistor control − CMOS hysteresis input − Automotive hysteresis input − TTL input − Pull-down control CMOS-hys input PSS control;...

  • Page 27: Port Description

    S6J3350 Series 6. Port Description Port Description List This table shows the port function of description which is supported. The port function which is not described in the table is not supported for the product. Package Pin Number Remarks Port Name Description TEQFP TEQFP...
  • Page 28 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP Sub-clock oscillator input NMIX Non-maskable interrupt input pin RSTX External reset input pin PSC_1 External Power Supply Control pin MODE Mode Pin External capacity connection output pin JTAG_NTRST JTAG test reset input pin JTAG_TDO JTAG test data output pin...
  • Page 29 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP AN21 ADC Unit0 ch.21 input pin AN22 ADC Unit0 ch.22 input pin AN23 ADC Unit0 ch.23 input pin AN24 ADC Unit0 ch.24 input pin AN25 ADC Unit0 ch.25 input pin AN26 ADC Unit0 ch.26 input pin AN27...
  • Page 30 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP TX6_0 CAN transmission data 6 output pin (0) TX7_0 CAN transmission data 7 output pin (0) TX0_1 CAN transmission data 0 output pin (1) TX1_1 CAN transmission data 1 output pin (1) TX2_1 CAN transmission data 2 output pin (1) TX3_1...
  • Page 31 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP EINT21_0 External interrupt input pin (0) EINT22_0 External interrupt input pin (0) EINT23_0 External interrupt input pin (0) EINT0_1 External interrupt input pin (1) EINT1_1 External interrupt input pin (1) EINT2_1 External interrupt input pin (1) EINT3_1...
  • Page 32 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP EINT22_2 External interrupt input pin (2) EINT23_2 External interrupt input pin (2) EINT0_3 External interrupt input pin (3) EINT1_3 External interrupt input pin (3) EINT2_3 External interrupt input pin (3) EINT3_3 External interrupt input pin (3) EINT4_3...
  • Page 33 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP EINT23_4 External interrupt input pin (4) EINT0_5 External interrupt input pin (5) EINT1_5 External interrupt input pin (5) EINT2_5 External interrupt input pin (5) EINT3_5 External interrupt input pin (5) EINT4_5 External interrupt input pin (5) EINT5_5...
  • Page 34 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP SCS100_0 Multi-function serial ch.10 chip select 0 I/O pin (0) SCS110_0 Multi-function serial ch.11 chip select 0 I/O pin (0) SCS111_0 Multi-function serial ch.11 chip select 1 output pin (0) SCS120_0 Multi-function serial ch.12 chip select 0 I/O pin (0) SCS160_0...
  • Page 35 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP SCK0_1 Multi-function serial ch.0 clock I/O pin (1) SCK1_1 Multi-function serial ch.1 clock I/O pin (1) SCK2_1 Multi-function serial ch.2 clock I/O pin (1) SCK3_1 Multi-function serial ch.3 clock I/O pin (1) SCK4_1 Multi-function serial ch.4 clock I/O pin (1) SCK8_1...
  • Page 36 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP SOT17_0 Multi-function serial ch.17 serial data output pin (0) SOT0_1 Multi-function serial ch.0 serial data output pin (1) SOT1_1 Multi-function serial ch.1 serial data output pin (1) SOT2_1 Multi-function serial ch.2 serial data output pin (1) SOT3_1 Multi-function serial ch.3 serial data output pin (1)
  • Page 37 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP PPG8_TOUT0_0 Base timer 16 output pin (0) PPG8_TOUT2_0 Base timer 17 output pin (0) PPG9_TOUT0_0 Base timer 18 output pin (0) PPG9_TOUT2_0 Base timer 19 output pin (0) PPG10_TOUT0_0 Base timer 20 output pin (0) PPG10_TOUT2_0...
  • Page 38 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP PPG0_TOUT2_1 Base timer 1 output pin (1) PPG1_TOUT0_1 Base timer 2 output pin (1) PPG1_TOUT2_1 Base timer 3 output pin (1) PPG2_TOUT0_1 Base timer 4 output pin (1) PPG2_TOUT2_1 Base timer 5 output pin (1) PPG3_TOUT0_1...
  • Page 39 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP OCU9_OTD0_0 Output compare 9 ch.0 output pin (0) OCU9_OTD1_0 Output compare 9 ch.1 output pin (0) OCU10_OTD0_0 Output compare 10 ch.0 output pin (0) OCU10_OTD1_0 Output compare 10 ch.1 output pin (0) OCU0_OTD0_1 Output compare 0 ch.0 output pin (1) OCU0_OTD1_1...
  • Page 40 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP TIN1_1 Reload timer ch.1 event input pin (1) TIN16_1 Reload timer ch.16 event input pin (1) TIN17_1 Reload timer ch.17 event input pin (1) TIN48_1 Reload timer ch.48 event input pin (1) TIN49_1 Reload timer ch.49 event input pin (1) TOT0_0...
  • Page 41 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP COL_1 Ethernet pin (1) CRS_1 Ethernet pin (1) RXER_1 Ethernet pin (1) RXDV_1 Ethernet pin (1) RXCLK_1 Ethernet pin (1) TXER_1 Ethernet pin (1) TXEN_1 Ethernet pin (1) TXCLK_1 Ethernet pin (1) MDC_1...
  • Page 42 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP MAD11 External Bus pin MAD12 External Bus pin MAD13 External Bus pin MAD14 External Bus pin MAD15 External Bus pin MAD16 External Bus pin MAD17 External Bus pin MAD18 External Bus pin MAD19...
  • Page 43 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP P0_12 General-Purpose I/O port P0_13 General-Purpose I/O port P0_14 General-Purpose I/O port P0_15 General-Purpose I/O port P0_16 General-Purpose I/O port P0_17 General-Purpose I/O port P0_18 General-Purpose I/O port P0_19 General-Purpose I/O port P0_20...
  • Page 44 S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP P1_29 General-Purpose I/O port P1_30 General-Purpose I/O port P1_31 General-Purpose I/O port P2_00 General-Purpose I/O port P2_01 General-Purpose I/O port P2_02 General-Purpose I/O port P2_03 General-Purpose I/O port P2_04 General-Purpose I/O port P2_05...

  • Page 45: Remark

    S6J3350 Series Package Pin Number Remarks Port Name Description TEQFP TEQFP TEQFP P3_26 General-Purpose I/O port P3_27 General-Purpose I/O port P3_28 General-Purpose I/O port P3_29 General-Purpose I/O port P3_30 General-Purpose I/O port P3_31 General-Purpose I/O port P4_00 General-Purpose I/O port P4_01 General-Purpose I/O port P4_02...

  • Page 46: Port Configuration

    S6J3350 Series 7. Port Configuration Resource Input Configuration Module The resource input configuration module (RIC) is a function to select input from an external or output from another internal resource as resource input. A resource which supports either a port input relocation or a resource inputs from the other resource has its RIC_RESIN register to configure resource input configuration.
  • Page 47 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL TOT48 TOT49 (0-7) RESSEL RIC_RE MFS16_T (8-15) SIN004 RIGGER PORTSEL (0x0008) (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN005 SCS16 PORTSEL (0x000A) P1_11 P4_23 (0-7) PORTSEL (8-15) RESSEL...
  • Page 48 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN010 SDA17 (8-15) (0x0014) PORTSEL (0-7) PORTSEL (8-15) RESSEL TOT48 TOT49 (0-7) RESSEL RIC_RE (8-15) MFS17_T SIN011 RIGGER...
  • Page 49 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN023 SCL0 (8-15) (0x002E) PORTSEL (0-7) PORTSEL (8-15) 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable...
  • Page 50 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN029 SCK1 PORTSEL (0x003A) P0_02 P3_01 (0-7) PORTSEL (8-15) 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN030 SCL1 (8-15) (0x003C)
  • Page 51 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN035 SIN2 PORTSEL (0x0046) P0_21 P4_30 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN036 SCK2 PORTSEL (0x0048) P0_22 P4_31 (0-7) PORTSEL (8-15) RESSEL TOT0...
  • Page 52 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN042 SIN3 PORTSEL (0x0054) P0_28 P3_28 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN043 SCK3 PORTSEL (0x0056) P0_29 P3_29 (0-7) PORTSEL (8-15) Page 51 of 307 Document Number: 002-10634 Rev.
  • Page 53 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL TOT0 TOT1 (0-7) RESSEL RIC_RE MFS3_TR (8-15) SIN046 IGGER PORTSEL (0x005C) (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN047 SCS3 PORTSEL (0x005E) P0_31 P3_31 (0-7) PORTSEL (8-15) RESSEL...
  • Page 54 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN052 SDA4 (8-15) (0x0068) PORTSEL (0-7) PORTSEL (8-15) RESSEL TOT0 TOT1 (0-7) RESSEL RIC_RE (8-15) MFS4_TR SIN053 IGGER...
  • Page 55 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN079 SCL8 (8-15) (0x009E) PORTSEL (0-7) PORTSEL (8-15) 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable...
  • Page 56 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN085 SCK9 PORTSEL (0x00AA) P1_24 P3_19 P0_23 (0-7) PORTSEL (8-15) 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN086 SCL9 (8-15)

  • Page 57: Ressel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN091 SIN10 PORTSEL (0x00B6) P1_28 P3_12 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN092 SCK10 PORTSEL (0x00B8) P1_29 P3_13 (0-7) PORTSEL (8-15) 80ns 80ns...

  • Page 58: Ressel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN096 SCS10 PORTSEL (0x00C0) P1_31 P3_15 (0-7) PORTSEL (8-15) 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN100 SCL11 (8-15) (0x00C8)
  • Page 59 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN106 SCK12 PORTSEL (0x00D4) P2_06 P1_15 (0-7) PORTSEL (8-15) 80ns 80ns RESSEL noise noise (0-7) filter filter disable enable RIC_RE RESSEL SIN107 SCL12 (8-15) (0x00D6)
  • Page 60 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] MCAN5 RESSEL PORT_ _PIN_A (0-7) ND_TX RIC_RE RESSEL SIN133 (8-15) (0x010A) PORTSEL P1_17 P3_19 (0-7) PORTSEL (8-15) MCAN6 RESSEL PORT_ _PIN_A (0-7) ND_TX RESSEL RIC_RE (8-15) SIN134 (0x010C) PORTSEL P1_21...
  • Page 61 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] MCAN2 RESSEL PORT_ _PIN_A (0-7) ND_TX RIC_RE RESSEL SIN138 (8-15) (0x0114) PORTSEL P1_11 P3_14 (0-7) PORTSEL (8-15) MCAN3 RESSEL PORT_ _PIN_A (0-7) ND_TX RESSEL RIC_RE (8-15) SIN139 (0x0116) PORTSEL P1_13...
  • Page 62 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT49_ TOT49 (0-7) UFSET RESSEL RIC_RE (8-15) SIN141 TIN48 PORTSEL (0x011A) P1_13 P3_16 (0-7) PORTSEL (8-15) RESSEL PORT_ RLT48_ TOT48 (0-7) UFSET RESSEL RIC_RE (8-15) SIN142 TIN49 PORTSEL...
  • Page 63 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT17_ PPG6_T TOT17 (0-7) UFSET OUT0 RESSEL RIC_RE (8-15) SIN160 TIN16 PORTSEL (0x0140) P1_07 P3_12 (0-7) PORTSEL (8-15) RESSEL PORT_ RLT16_ PPG7_T TOT16 (0-7) UFSET OUT0 RESSEL RIC_RE...

  • Page 64: P0_28

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN192 EINT0 PORTSEL (0x0180) P2_13 P0_00 P0_08 P0_20 P3_17 P2_01 P2_16 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN193 EINT1 PORTSEL (0x0182) P0_01 P3_00...

  • Page 65: P0_29

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN197 EINT5 PORTSEL (0x018A) P1_04 P0_03 P0_10 P0_26 P4_17 P4_28 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN198 EINT6 PORTSEL (0x018C) P1_05 P3_09 P0_11...
  • Page 66 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN202 EINT10 PORTSEL (0x0194) P1_09 P4_02 P3_02 P1_00 P4_23 P4_31 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN203 EINT11 PORTSEL (0x0196) P1_10 P0_04 P3_03...

  • Page 67: P3_29

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN207 EINT15 PORTSEL (0x019E) P1_14 P0_06 P3_05 P4_10 P1_25 P2_09 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN208 EINT16 PORTSEL (0x01A0) P1_15 P4_19 P3_06...

  • Page 68: Portsel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN212 EINT20 PORTSEL (0x01A8) P1_23 P3_18 P3_07 P4_12 P1_29 P2_11 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN213 EINT21 PORTSEL (0x01AA) P1_28 P3_12 P0_17...

  • Page 69: Ric_Re

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ PPG0_T TOT0 TOT1 (0-7) OUT2 RESSEL RIC_RE (8-15) SIN216 TEXT0 PORTSEL (0x01B0) (0-7) PORTSEL (8-15) RESSEL PORT_ PPG1_T TOT0 TOT1 (0-7) OUT2 RESSEL RIC_RE (8-15) SIN217 TEXT1 PORTSEL...

  • Page 70: Portsel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ PPG4_T TOT0 TOT1 (0-7) OUT2 RESSEL RIC_RE (8-15) SIN220 TEXT4 PORTSEL (0x01B8) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U RLT16_ PPG6_T (0-7) FSET UFSET OUT2 RESSEL RIC_RE (8-15) SIN224...
  • Page 71 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0 FRT1 FRT2 FRT3 FRT4 (0-7) RESSEL OCU0_C (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0 FRT1 FRT2 FRT3 FRT4 (0-7) RESSEL (8-15) OCU0_CK PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_D...
  • Page 72 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_F FRT1_F FRT2_F FRT3_F FRT4_F (0-7) RESSEL OCU0_FC (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_M FRT1_M FRT2_M FRT3_M FRT4_M (0-7) RESSEL (8-15) OCU0_MT PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_M...
  • Page 73 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_Z FRT1_Z FRT2_Z FRT3_Z FRT4_Z (0-7) RESSEL OCU0_ZT (8-15) PORTSEL (0-7) PORTSEL IN232 (8-15) (0x01D0) RESSEL FRT0_Z FRT1_Z FRT2_Z FRT3_Z FRT4_Z (0-7) RESSEL (8-15) OCU0_ZT PORTSEL (0-7) PORTSEL (8-15)

  • Page 74: Ressel (0-7) Ressel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0 FRT1 FRT2 FRT3 FRT4 (0-7) RESSEL OCU1_CK (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_D FRT1_D FRT2_D FRT3_D FRT4_D (0-7) OWNB OWNB OWNB OWNB OWNB RESSEL (8-15) OCU1_D OWNB0...

  • Page 75: Ric_Re

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_M FRT1_M FRT2_M FRT3_M FRT4_M (0-7) RESSEL OCU1_MT (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_M FRT1_M FRT2_M FRT3_M FRT4_M (0-7) RESSEL (8-15) OCU1_MT PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN235...

  • Page 76: Tsf Tsf Tsf Tsf Tsf

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_Z FRT1_Z FRT2_Z FRT3_Z FRT4_Z (0-7) RESSEL OCU1_ZT (8-15) PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN235 RESSEL FRT0_Z FRT1_Z FRT2_Z FRT3_Z FRT4_Z (0x01D6) (0-7) RESSEL (8-15) OCU1_ZT PORTSEL (0-7) PORTSEL...

  • Page 77: Ressel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0 FRT1 FRT2 FRT3 FRT4 (0-7) RESSEL OCU2_CK (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0 FRT1 FRT2 FRT3 FRT4 (0-7) RESSEL RIC_RE (8-15) OCU2_CK SIN238 PORTSEL (0x01DC) (0-7) PORTSEL...

  • Page 78: Sf1 Portsel

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_D FRT1_D FRT2_D FRT3_D FRT4_D (0-7) OWNB OWNB OWNB OWNB OWNB RESSEL OCU2_D (8-15) OWNB1 PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_F FRT1_F FRT2_F FRT3_F FRT4_F (0-7) RESSEL (8-15) OCU2_FC...
  • Page 79 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0-7) [31:0] [31:0] [31:0] [31:0] [31:0] RESSEL OCU2_T0[ (8-15) 31:0] PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0-7) [31:0] [31:0] [31:0]...

  • Page 80: Ressel Set

    S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 1 set 0 (0-7) RESSEL RIC_RE OCU2_M (8-15) SIN239 PORTSEL (0x01DE) (0-7) PORTSEL (8-15) RESSEL set 1 set 0 (0-7) RESSEL RIC_RE (8-15) OCU2_M SIN240 PORTSEL (0x01E0) (0-7)
  • Page 81 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8 FRT9 FRT10 (0-7) RESSEL OCU8_CK (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8 FRT9 FRT10 (0-7) RESSEL (8-15) OCU8_CK PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8_D FRT9_D FRT10_ (0-7) OWNB...
  • Page 82 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_F FRT9_F FRT10_ (0-7) FCMD RESSEL OCU8_FC (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8_M FRT9_M FRT10_ (0-7) MTSF RESSEL (8-15) OCU8_MT PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8_M FRT9_M FRT10_...
  • Page 83 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_Z FRT9_Z FRT10_ (0-7) ZTSF RESSEL OCU8_ZT (8-15) PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN256 RESSEL FRT8_Z FRT9_Z FRT10_ (0x0200) (0-7) ZTSF RESSEL (8-15) OCU8_ZT PORTSEL (0-7) PORTSEL (8-15) RESSEL...
  • Page 84 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 1 set 0 (0-7) RESSEL RIC_RE OCU8_M (8-15) SIN258 PORTSEL (0x0204) (0-7) PORTSEL (8-15) RESSEL FRT8 FRT9 FRT10 (0-7) RESSEL (8-15) OCU9_CK PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN259...
  • Page 85 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_D FRT9_D FRT10_ (0-7) OWNB OWNB DOWNB RESSEL OCU9_D (8-15) OWNB0 PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8_D FRT9_D FRT10_ (0-7) OWNB OWNB DOWNB RESSEL (8-15) OCU9_D OWNB1 PORTSEL (0-7)
  • Page 86 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_M FRT9_M FRT10_ (0-7) MTSF RESSEL OCU9_MT (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8_T FRT9_T FRT10_ (0-7) [31:0] [31:0] T[31:0] RESSEL (8-15) OCU9_T0[ 31:0] PORTSEL (0-7) PORTSEL (8-15) RESSEL...
  • Page 87 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 1 set 0 (0-7) RESSEL RIC_RE OCU9_M (8-15) SIN260 PORTSEL (0x0208) (0-7) PORTSEL (8-15) RESSEL set 1 set 0 (0-7) RESSEL RIC_RE (8-15) OCU9_M SIN261 PORTSEL (0x020A) (0-7)
  • Page 88 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8 FRT9 FRT10 (0-7) RESSEL OCU10_C (8-15) PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8 FRT9 FRT10 (0-7) RESSEL (8-15) OCU10_C PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN262 RESSEL FRT8_D FRT9_D FRT10_...
  • Page 89 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_F FRT9_F FRT10_ (0-7) FCMD RESSEL OCU10_F (8-15) CMD0 PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN262 RESSEL FRT8_F FRT9_F FRT10_ (0x020C) (0-7) FCMD RESSEL (8-15) OCU10_F CMD1 PORTSEL (0-7) PORTSEL...
  • Page 90 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_M FRT9_M FRT10_ (0-7) MTSF RESSEL OCU10_M (8-15) TSF0 PORTSEL (0-7) PORTSEL (8-15) RESSEL FRT8_M FRT9_M FRT10_ (0-7) MTSF RESSEL (8-15) OCU10_M TSF1 PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN262...
  • Page 91 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_Z FRT9_Z FRT10_ (0-7) ZTSF RESSEL OCU10_Z (8-15) TSF0 PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN262 RESSEL FRT8_Z FRT9_Z FRT10_ (0x020C) (0-7) ZTSF RESSEL (8-15) OCU10_Z TSF1 PORTSEL (0-7) PORTSEL...
  • Page 92 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 1 set 0 (0-7) RESSEL RIC_RE OCU10_M (8-15) SIN263 PORTSEL (0x020E) (0-7) PORTSEL (8-15) RESSEL set 1 set 0 (0-7) RESSEL RIC_RE (8-15) OCU10_M SIN264 PORTSEL (0x0210) (0-7)
  • Page 93 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0-7) [31:0] [31:0] [31:0] [31:0] [31:0] RESSEL ICU0_T0[ (8-15) 31:0] PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN282 RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0x0234) (0-7)
  • Page 94 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0-7) [31:0] [31:0] [31:0] [31:0] [31:0] RESSEL ICU1_T0[ (8-15) 31:0] PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN285 RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0x023A) (0-7)
  • Page 95 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0-7) [31:0] [31:0] [31:0] [31:0] [31:0] RESSEL ICU2_T0[ (8-15) 31:0] PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN288 RESSEL FRT0_T FRT1_T FRT2_T FRT3_T FRT4_T (0x0240) (0-7)
  • Page 96 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_T FRT9_T FRT10_ (0-7) [31:0] [31:0] T[31:0] RESSEL ICU8_T0[ (8-15) 31:0] PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN306 RESSEL FRT8_T FRT9_T FRT10_ (0x0264) (0-7) [31:0] [31:0] T[31:0] RESSEL (8-15) ICU8_T1[...
  • Page 97 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_T FRT9_T FRT10_ (0-7) [31:0] [31:0] T[31:0] RESSEL ICU9_T0[ (8-15) 31:0] PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN309 RESSEL FRT8_T FRT9_T FRT10_ (0x026A) (0-7) [31:0] [31:0] T[31:0] RESSEL (8-15) ICU9_T1[...
  • Page 98 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL FRT8_T FRT9_T FRT10_ (0-7) [31:0] [31:0] T[31:0] RESSEL ICU10_T0 (8-15) [31:0] PORTSEL (0-7) PORTSEL RIC_RE (8-15) SIN312 RESSEL FRT8_T FRT9_T FRT10_ (0x0270) (0-7) [31:0] [31:0] T[31:0] RESSEL (8-15) ICU10_T1...
  • Page 99 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ PPG6_T PPG6_T PPG7_T TOT16 (0-7) OUT0 OUT2 OUT0 RESSEL RIC_RE (8-15) SIN354 ZIN8 PORTSEL (0x02C4) (0-7) PORTSEL (8-15) RESSEL PORT_ TOT16 (0-7) RESSEL RIC_RE (8-15) SIN355 AIN9 PORTSEL...
  • Page 100 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT0_U FRT0_M OCU0_ TOT0 TOT0 (0-7) FSET FSET OTD0 RESSEL RIC_RE PPG0_TI (8-15) SIN376 PORTSEL (0x02F0) P1_16 P3_04 (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE...
  • Page 101 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG1_TI (8-15) SIN380 PORTSEL (0x02F8) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG1_TI SIN381 PORTSEL (0x02FA) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 102 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT1_U FRT0_M OCU0_ TOT0 TOT1 (0-7) FSET FSET OTD0 RESSEL RIC_RE PPG3_TI (8-15) SIN385 PORTSEL (0x0302) P1_16 P3_04 (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE...
  • Page 103 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG4_TI (8-15) SIN390 PORTSEL (0x030C) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U RLT1_U FRT0_M OCU0_ TOT0 TOT1 (0-7) FSET FSET OTD0 RESSEL RIC_RE (8-15) PPG5_TI...
  • Page 104 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG6_TI (8-15) SIN395 PORTSEL (0x0316) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG6_TI SIN396 PORTSEL (0x0318) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 105 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT16_ FRT8_M OCU8_ TOT0 TOT16 (0-7) FSET UFSET OTD0 RESSEL RIC_RE PPG8_TI (8-15) SIN400 PORTSEL (0x0320) P1_29 P3_20 (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE...
  • Page 106 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG9_TI (8-15) SIN405 PORTSEL (0x032A) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U RLT17_ FRT8_M OCU8_ TOT0 TOT17 (0-7) FSET UFSET OTD0 RESSEL RIC_RE (8-15) PPG10_TI...
  • Page 107 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG11_TI (8-15) SIN410 PORTSEL (0x0334) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG11_TI SIN411 PORTSEL (0x0336) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 108 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE PPG13_TI (8-15) SIN433 PORTSEL (0x0362) P2_06 P3_31 (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG13_TI SIN434 PORTSEL (0x0364) (0-7)
  • Page 109 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG14_TI (8-15) SIN438 PORTSEL (0x036C) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE (8-15) PPG15_TI SIN439 PORTSEL (0x036E) P2_06 P3_31 (0-7)
  • Page 110 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG16_TI (8-15) SIN443 PORTSEL (0x0376) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG16_TI SIN444 PORTSEL (0x0378) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 111 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE PPG18_TI (8-15) SIN448 PORTSEL (0x0380) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG18_TI SIN449 PORTSEL (0x0382) (0-7) PORTSEL (8-15)
  • Page 112 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG19_TI (8-15) SIN453 PORTSEL (0x038A) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE (8-15) PPG20_TI SIN454 PORTSEL (0x038C) (0-7) PORTSEL (8-15)
  • Page 113 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG21_TI (8-15) SIN458 PORTSEL (0x0394) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG21_TI SIN459 PORTSEL (0x0396) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 114 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE PPG23_TI (8-15) SIN463 PORTSEL (0x039E) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG23_TI SIN464 PORTSEL (0x03A0) (0-7) PORTSEL (8-15)
  • Page 115 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG24_TI (8-15) SIN468 PORTSEL (0x03A8) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE (8-15) PPG25_TI SIN469 PORTSEL (0x03AA) (0-7) PORTSEL (8-15)
  • Page 116 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG26_TI (8-15) SIN473 PORTSEL (0x03B2) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG26_TI SIN474 PORTSEL (0x03B4) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 117 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE PPG28_TI (8-15) SIN478 PORTSEL (0x03BC) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG28_TI SIN479 PORTSEL (0x03BE) (0-7) PORTSEL (8-15)
  • Page 118 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG29_TI (8-15) SIN483 PORTSEL (0x03C6) (0-7) PORTSEL (8-15) RESSEL PORT_ RLT0_U TOT0 (0-7) FSET RESSEL RIC_RE (8-15) PPG30_TI SIN484 PORTSEL (0x03C8) (0-7) PORTSEL (8-15)
  • Page 119 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL set 0 (0-7) RESSEL RIC_RE PPG31_TI (8-15) SIN488 PORTSEL (0x03D0) (0-7) PORTSEL (8-15) RESSEL set 0 (0-7) RESSEL RIC_RE (8-15) PPG31_TI SIN489 PORTSEL (0x03D2) (0-7) PORTSEL (8-15) Page 118 of 307 Document Number: 002-10634 Rev.
  • Page 120 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT1_U OCU0_ OCU1_ PPG0_T PPG1_T PPG3_T (0-7) FSET FSET OTD0 OTD0 OUT0 OUT2 OUT2 RESSEL RIC_RE ADC12B0 (8-15) SIN490 _HWTRG PORTSEL (0x03D4) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 121 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT1_U RLT17_ OCU10_ OCU0_ PPG2_T PPG4_T PPG6_T (0-7) FSET UFSET OTD0 OTD0 OUT2 OUT0 OUT0 RESSEL RIC_RE ADC12B0 (8-15) SIN495 _HWTRG PORTSEL (0x03DE) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 122 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT16_ RLT1_U OCU9_ OCU0_ PPG5_T PPG6_T PPG8_T (0-7) UFSET FSET OTD0 OTD0 OUT0 OUT2 OUT2 RESSEL RIC_RE ADC12B0 (8-15) SIN500 _HWTRG PORTSEL (0x03E8) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 123 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT17_ RLT0_U OCU8_ OCU0_ PPG7_T PPG9_T PPG11_ (0-7) UFSET FSET OTD0 OTD0 OUT2 OUT0 TOUT0 RESSEL RIC_RE ADC12B0 (8-15) SIN505 _HWTRG PORTSEL (0x03F2) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 124 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT17_ OCU2_ OCU0_ PPG10_ PPG11_ PPG13_ (0-7) FSET UFSET OTD0 OTD0 TOUT0 TOUT2 TOUT2 RESSEL RIC_RE ADC12B0 (8-15) SIN510 _HWTRG PORTSEL (0x03FC) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 125 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT1_U RLT16_ OCU1_ OCU0_ PPG12_ PPG14_ PPG16_ (0-7) FSET UFSET OTD0 OTD0 TOUT2 TOUT0 TOUT0 RESSEL RIC_RE ADC12B0 (8-15) SIN515 _HWTRG PORTSEL (0x0406) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 126 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT16_ RLT0_U OCU0_ OCU1_ PPG15_ PPG16_ PPG18_ (0-7) UFSET FSET OTD0 OTD0 TOUT0 TOUT2 TOUT2 RESSEL RIC_RE ADC12B0 (8-15) SIN520 _HWTRG PORTSEL (0x0410) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 127 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT17_ RLT16_ OCU10_ OCU0_ PPG17_ PPG19_ PPG21_ (0-7) UFSET UFSET OTD0 OTD0 TOUT2 TOUT0 TOUT0 RESSEL RIC_RE ADC12B1 (8-15) SIN589 _HWTRG PORTSEL (0x049A) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 128 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT16_ OCU9_ OCU0_ PPG20_ PPG21_ PPG23_ (0-7) FSET UFSET OTD0 OTD0 TOUT0 TOUT2 TOUT2 RESSEL RIC_RE ADC12B1 (8-15) SIN594 _HWTRG PORTSEL (0x04A4) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 129 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT1_U RLT0_U OCU8_ OCU0_ PPG22_ PPG24_ PPG26_ (0-7) FSET FSET OTD0 OTD0 TOUT2 TOUT0 TOUT0 RESSEL RIC_RE ADC12B1 (8-15) SIN599 _HWTRG PORTSEL (0x04AE) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 130 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT16_ RLT17_ OCU2_ OCU0_ PPG25_ PPG26_ PPG28_ (0-7) UFSET UFSET OTD0 OTD0 TOUT0 TOUT2 TOUT2 RESSEL RIC_RE ADC12B1 (8-15) SIN604 _HWTRG PORTSEL (0x04B8) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 131 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT17_ RLT1_U OCU1_ OCU0_ PPG27_ PPG29_ PPG31_ (0-7) UFSET FSET OTD0 OTD0 TOUT2 TOUT0 TOUT0 RESSEL RIC_RE ADC12B1 (8-15) SIN609 _HWTRG PORTSEL (0x04C2) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 132 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL PORT_ RLT0_U RLT1_U OCU0_ OCU1_ PPG30_ PPG31_ PPG1_T (0-7) FSET FSET OTD0 OTD0 TOUT0 TOUT2 OUT2 RESSEL RIC_RE ADC12B1 (8-15) SIN614 _HWTRG PORTSEL (0x04CC) (0-7) PORTSEL (8-15) RESSEL PORT_...
  • Page 133 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL TOT0 TOT16 (0-7) RESSEL RIC_RE DDRHSS (8-15) SIN626 PI_MSTA PORTSEL (0x04E4) (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN629 MDIO PORTSEL (0x04EA) P0_31 P3_06 (0-7) PORTSEL (8-15) RESSEL...
  • Page 134 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN633 RXD2 PORTSEL (0x04F2) P0_29 P4_07 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN634 RXD3 PORTSEL (0x04F4) P0_30 P3_05 (0-7) PORTSEL (8-15) RESSEL (0-7)
  • Page 135 S6J3350 Series RESSEL Source for Resource Input Register [3:0] Resource (Offset) /PORT SEL[3:0] RESSEL (0-7) RESSEL RIC_RE (8-15) SIN638 RXCLK PORTSEL (0x04FC) P0_17 P4_00 (0-7) PORTSEL (8-15) RESSEL (0-7) RESSEL RIC_RE (8-15) SIN639 TXCLK PORTSEL (0x04FE) P0_20 P4_03 (0-7) PORTSEL (8-15) RESSEL (0-7)

  • Page 136: Port Output Function Configuration

    S6J3350 Series Port Output Function Configuration The port output function configuration (POF) is a function to select a function to output to a port. A resource which supports a port output relocation has its PPC_PCFGR.POF to configure resource output. Standard Configuration 7.2.1 Register Resource Functional Outputs...
  • Page 137 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO GR014 P0_14 DR0:POD SCK4_1 MOEX (0x001C) PPC_PCF GPIO_PO GR015 P0_15 DR0:POD SCS40_1 MWEX (0x001E) PPC_PCF GPIO_PO GR016 P0_16 DR0:POD SCS41_1 MCLK (0x0020) PPC_PCF GPIO_PO GR017...
  • Page 138 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO M_SDATA GR029 P0_29 DR0:POD SCK3_0 M_DQ5 SOT8_2 (0x003A) PPC_PCF GPIO_PO GR030 P0_30 DR0:POD SOT3_0 M_SSEL1 M_DQ6 SCS80_2 (0x003C) PPC_PCF GPIO_PO M_SDATA GR031 P0_31 DR0:POD SCS30_0...
  • Page 139 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO SCS161_ OCU8_O GR112 P1_12 DR1:POD TOT17_0 TX2_0 TD1_0 (0x0058) PPC_PCF GPIO_PO OCU9_O GR113 P1_13 DR1:POD TD0_0 (0x005A) PPC_PCF GPIO_PO SYSC0_C OCU9_O PPG5_TO GR114 P1_14 DR1:POD...
  • Page 140 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO PPG11_T GR127 P1_27 DR1:POD SCS91_0 OUT0_0 (0x0076) PPC_PCF GPIO_PO PPG11_T GR128 P1_28 DR1:POD OUT2_0 (0x0078) PPC_PCF GPIO_PO GR129 P1_29 DR1:POD SCK10_0 SCL10 (0x007A) PPC_PCF GPIO_PO...
  • Page 141 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO GR210 P2_10 DR2:POD SCS31_1 MCSX1 (0x0094) PPC_PCF GPIO_PO GR211 P2_11 DR2:POD SCS32_1 MDATA0 (0x0096) PPC_PCF GPIO_PO GR212 P2_12 DR2:POD SCS33_1 MDATA1 (0x0098) PPC_PCF GPIO_PO GR213...
  • Page 142 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO GR305 P3_05 DR3:POD SCS12_1 MAD20 (0x00CA) PPC_PCF GPIO_PO GR306 P3_06 DR3:POD SCS13_1 MDIO_1 SOT4_1 MAD21 (0x00CC) PPC_PCF GPIO_PO GR307 P3_07 DR3:POD SCS42_1 MDQM1 (0x00CE) PPC_PCF...
  • Page 143 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO GR320 P3_20 DR3:POD SOT9_1 TX5_1 (0x00E8) PPC_PCF GPIO_PO GR321 P3_21 DR3:POD SCS90_1 TOT49_1 (0x00EA) PPC_PCF GPIO_PO GR322 P3_22 DR3:POD SCS91_1 (0x00EC) PPC_PCF GPIO_PO SCS120_ GR323...
  • Page 144 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO SCS170_ PPG17_T GR403 P4_03 DR4:POD OUT2_0 (0x0106) PPC_PCF GPIO_PO PPG18_T GR404 P4_04 DR4:POD TXEN_1 SCK17_1 TX3_2 OUT0_0 (0x0108) PPC_PCF GPIO_PO PPG18_T GR405 P4_05 DR4:POD TXD0_1...
  • Page 145 S6J3350 Series Resource Functional Outputs Register Port (Offset) POF=0 POF=1 POF=2 POF=3 POF=4 POF=5 POF=6 POF=7 PPC_PCF GPIO_PO PPG26_T GR418 P4_18 DR4:POD OUT0_0 (0x0124) PPC_PCF GPIO_PO PPG26_T GR419 P4_19 DR4:POD OUT2_0 (0x0126) PPC_PCF GPIO_PO PPG27_T GR420 P4_20 DR4:POD SOT16_1 TX4_0 OUT0_0 (0x0128) PPC_PCF...
  • Page 146 S6J3350 Series Notes: − The hyphen indicates that setting is prohibited. If setting the port will be operated as input independent on the register value of the GPIO_DDR. − The register for P0_20 for POF exists though the port only supports input not supports output. The configuration of POF=0 for the port does not affect anything.

  • Page 147: Precautions And Handling Devices

    S6J3350 Series 8. Precautions and Handling Devices Handling Precautions Any semiconductor devices have inherently a certain rate of failure. The possibility of failure is greatly affected by the conditions in which they are used (circuit conditions, environmental conditions, etc.). This page describes precautions that must be observed to minimize the chance of failure and to obtain higher reliability from your Cypress semiconductor devices.
  • Page 148 S6J3350 Series Precautions for Package Mounting 8.1.2 Package mounting may be either lead insertion type or surface mount type. In either case, for heat resistance during soldering, you should only mount under Cypress’s recommended conditions. For detailed information about mount conditions, contact your sales representative.
  • Page 149 S6J3350 Series (5) Avoid the use of styrofoam or other highly static-prone materials for storage of completed board assemblies. Precautions for Use Environment 8.1.3 Reliability of semiconductor devices depends on ambient temperature and other conditions as described above. For reliable performance, do the following: (1) Humidity Prolonged use in high humidity can lead to leakage in devices as well as printed circuit boards.

  • Page 150: Handling Devices

    S6J3350 Series Handling Devices For Latch-Up Prevention The latch-up phenomenon may occur on a CMOS IC in the following cases: the voltage applied to an input or output pin is higher than VCC or lower than VSS; or the voltage applied between a VCC pin and a VSS pin exceeds the rating. A latch-up causes a rapid increase in the power supply current, possibly resulting in thermal damage to an element.
  • Page 151 S6J3350 Series About the Mode Pin (MODE) Use mode pin MODE by directly connecting it to a VCC or VSS pin. To prevent noise from causing the device to accidentally enter test mode, reduce the pattern length between each mode pin and a VCC or VSS pin on the printed circuit board, and connect them with low impedance.

  • Page 152: Electric Characteristics

    S6J3350 Series 9. Electric Characteristics Electrical Characteristics This chapter contains target values and information. Target values and information are subjects to change without notice. Absolute Maximum Rating 9.1.1 Rating Parameter Symbol Unit Remarks -0.3 +6.0 -0.3 +6.0 53 ≤ V Power supply voltage -0.3 +4.0...
  • Page 153 S6J3350 Series Rating Parameter Symbol Unit Remarks ΣI "L"-level total output current *9, *11 ΣI *6, *7, *8 -3.5 When setting is 1 mA *6, *7, *8, *9 When setting is 2 mA When setting is 5 mA "H"-level maximum output When setting is 10 mA current When setting is 30 mA...
  • Page 154 S6J3350 Series *4 The average output current is defined as the value of the average current flowing through any one of the corresponding pins for a 10 ms period. The average value is the operation current × the operation ratio. *5 The total output current is defined as the maximum current value flowing through all of corresponding pins.
  • Page 155 S6J3350 Series • Use at DC voltage (current). MCU is operational, IO is driving LOW level (i.e. NMOS transistor active), there are negative biased pulses (-B signal) applied to active IO according to following specification (must not be exceeded). Pulse condition specification: U_pulse = max -40 V T_pulse = max 1 ms #_pulse = max 5000...
  • Page 156 S6J3350 Series • Use at DC voltage (current). MCU is non-operational, PCB is in reverse polarity condition (supply of the MCU is off), negative biased voltage level (-B signal) is applied to inactive IO according to following specification (must not be exceeded). Reverse polarity condition specification: U_reverse = max -28 V T_reverse = max 4 h...
  • Page 157 S6J3350 Series Recommended Operating Condition 9.1.2 Rating Parameter Symbol Pin Name Unit Remarks VCC5 *2 *3 VCC53 Supply voltage *1 *3 DVCC Recommended operation assurance range AVCC5 *2 *3 VCC3 VCC12 1.09 1.21 VCC5 *2 *3 VCC53 *1 *3 Supply voltage DVCC Operation assurance range AVCC5...
  • Page 158 S6J3350 Series When it is used outside recommended range (this is the range of guaranteed operation), contact your sales representative. The initial detection voltage of the external low voltage detection is 2.6 V ± 3.5 % (LVDH1/LVDH2) or 0.8125 ± 3.5 % (LVDL2). This LVD setting and internal LVD (LVDL0/LVDL1) cannot be used to reliably generate a reset before voltage dips below minimum guaranteed MCU operation voltage, as these detection levels are below the minimum guaranteed MCU operation voltage.
  • Page 159 S6J3350 Series Notes: − : Ambient temperature (JEDEC) − : Case temperature (JEDEC), the maximum measured temperature of package case top. − Both rating of T and T should simultaneously be satisfied as maximum operation temperature. − The following condition should be satisfied in order to facilitate heat dissipation. 1.
  • Page 160 S6J3350 Series DC Characteristics 9.1.3 : Recommended operating conditions, V 53 = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks CMOS hysteresis 0.7×V...
  • Page 161 S6J3350 Series : Recommended operating conditions, V 53 = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks CMOS hysteresis 0.3×V Vss-0.3 P0_00 to P0_20,...
  • Page 162 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Conditions Unit Remarks Name 53=4.5 V =-1.0 mA ODR[1:0]= 53 - 0.5 2b00...
  • Page 163 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3=3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Conditions Unit Remarks Name 53 = 4.5 V OH19 = -1.0 mA ODR[1:0] 53 - 0.5...
  • Page 164 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10%, V 3 = 3.3 V ± 0.3 V, = DV = AV = 0.0 V) Value Parameter Symbol Conditions Unit Remarks Name 53 = 4.5 V = 1.0 mA ODR[1:0]=2 53 = 3.0 V = 0.5 mA...
  • Page 165 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, = DV = AV = 0.0 V) Value Parameter Symbol Conditions Unit Remarks Name 53 = 4.5 V OL19 = 1.0 mA ODR[1:0]...
  • Page 166 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks P0_00 to P0_20, 5 = V 53 = P1_03 to P1_31,...
  • Page 167 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, 12 = 1.15 V ± 0.06 V, V = DV = AV = 0.0 V) Value Parameter Symbol Conditions Unit Remarks...
  • Page 168 S6J3350 Series : Recommended operating conditions, V 53, DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, 12 = 1.15 V ± 0.06 V, V = DV = AV = 0.0 V) Value Parameter Symbol Conditions Unit...
  • Page 169 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, 12 = 1.15 V ± 0.06 V, V = DV = AV =0.0 V) Value Parameter Symbol Conditions Unit Remarks Name...
  • Page 170 S6J3350 Series : Recommended operating conditions, V 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, 12 = 1.15 V ± 0.06 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit...
  • Page 171 S6J3350 Series AC Characteristics 9.1.4 Source Clock Timing 9.1.4.1 : Recommended operating conditions, Vcc5 = 5.0 V ± 10 %, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Source oscillation X0, X1 16.0 clock frequency Source oscillation...
  • Page 172 S6J3350 Series Sub Clock Timing 9.1.4.2 : Recommended operating conditions, Vcc5 = 5.0 V ±10 %, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Source oscillation X0A, X1A 32.768 clock frequency Source oscillation X0A, X1A 30.52 µs...
  • Page 173 S6J3350 Series Internal Clock Timing 9.1.4.3 This chapter shows the TARGET characteristics for internal clock timing at the current stage.  In the column symbol, same clock names as described in CHAPTER 5: CLOCK SYSTEM of Traveo™ Platform Hardware  Manual are used.
  • Page 174 S6J3350 Series Value Parameter Symbol Unit Remarks Max *1 Max *2 Max *3 Unused CLK_CD3B0 Unused CLK_CD3B1 Unused CLK_CD4 Unused CLK_CD4A0 Unused CLK_CD4A1 Unused CLK_CD4B0 Unused CLK_CD4B1 Unused CLK_CD5 Unused CLK_CD5A0 Internal clock Unused CLK_CD5A1 frequency Unused CLK_CD5B0 Unused CLK_CD5B1 CLK_HSSPI 66.7 CLK_SYSC0H...
  • Page 175 S6J3350 Series − Operation assurance range Relationship between the internal clock frequency and supply voltage Recommended guaranteed operation range Guaranteed operation range PLL guaranteed Maximum frequency operation range Frequency [MHz] of each clock 1.21 1.09 Maximum frequency Frequency [MHz] of each clock Note: CPU will be reset, when the power supply voltage is equal to or less than LVD setting voltage.
  • Page 176 S6J3350 Series − Relationship between the oscillation clock frequency and internal clock frequency Internal Operation Clock Frequency PLL Clock Main Multiplied Multiplied Multiplied Multiplied Multiplied Multiplied Clock by 1 by 2 by 15 by 30 by 40 by 60 … Oscillation clock …...
  • Page 177 S6J3350 Series Reset Input 9.1.4.4 : Recommended operating conditions, Vcc5 = 5.0 V ±10 %, V = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Reset µs input time RSTX RSTL Width for reset µs input removal Page 176 of 307 Document Number: 002-10634 Rev.
  • Page 178 S6J3350 Series Power-on Conditions 9.1.4.5 : Recommended operating conditions, V = 0.0 V) Value Parameter Symbol Conditions Unit Remarks Name Level detection VCC5 voltage Level detection VCC5 hysteresis width Level detection time μs Power off time VCC5 μs VCC5: Power ramp rate dV/dt VCC5 V/µs...
  • Page 179 S6J3350 Series Multi-Function Serial 9.1.4.6 UART (asynchronous serial interface) timing (SMR:MD2-0 = 0b000, 0b001) (1) External Clock Selected (BGR: EXT = 1) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ±10 % / 3.3 V ± 0.3 V , Vcc53 = 5.0 V ±...
  • Page 180 S6J3350 Series CSIO timing (SMR:MD2-0 = 0b010) (1) Normal Synchronous Transfer (SCR: SPI = 0) and Mark Level "H" of Serial Clock Output (SMR: SCINV = 0) : Recommended operating conditions, Vcc3 = 3.3 V ±0.3V, Vcc5 = DVcc = 5.0 V ± 10 % / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 181 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0 to SCK4, CLK_LCPnA SCK8 to SCK12 Serial clock SHSL "H" pulse width SCK16 to SCK17 CLK_COMP SCK0 to SCK4, CLK_LCPnA SCK8 to SCK12 Serial clock SLSH "L" pulse width SCK16 to SCK17 CLK_COMP SCK0 to SCK4,...
  • Page 182 S6J3350 Series SCYC SLOVI IVSHI SHIXI Master mode SLSH SHSL SLOVE IVSHE SHIXE Slave mode Page 181 of 307 Document Number: 002-10634 Rev. *J...
  • Page 183 S6J3350 Series (2) Normal Synchronous Transfer (SCR: SPI = 0) and Mark Level "L" of Serial Clock Output (SMR: SCINV = 1) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ±10% / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 184 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks Serial clock SCK2_0, SCK3_0 SCYC CLK_LCPnA cycle time Master SCK ↓ → SOT SCK2_0, SCK3_0, -7.5 +7.5 Mode SHOVI delay time SOT2_0, SOT3_0 (CL = 20pF, Valid SIN → SCK ↑ = -10mA, IVSLI setup time...
  • Page 185 S6J3350 Series SCYC SHOVI IVSLI SLIXI Master mode SHSL SLSH SHOVE IVSLE SLIXE Slave mode Page 184 of 307 Document Number: 002-10634 Rev. *J...
  • Page 186 S6J3350 Series (3) SPI Supported (SCR: SPI = 1), and Mark Level "H" of Serial Clock Output (SMR: SCINV = 0) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10% / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 187 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0 to SCK4, Serial clock CLK_LCPnA SCK8 to SCK12 SHSL "H" pulse width SCK16 to SCK17 CLK_COMP SCK0 to SCK4, Serial clock CLK_LCPnA SCK8 to SCK12 SLSH "L" pulse width SCK16 to SCK17 CLK_COMP SCK0 to SCK4,...
  • Page 188 S6J3350 Series SHSL SLSH SHOVE IVSLE SLIXE * Changes when writing to the TDR register Slave mode Page 187 of 307 Document Number: 002-10634 Rev. *J...
  • Page 189 S6J3350 Series (4) SPI Supported (SCR: SPI = 1), and Mark Level "L" of Serial Clock Output (SMR: SCINV = 1) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10 % / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 190 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0 to SCK4, Serial clock CLK_LCPnA SCK8 to SCK12 SHSL "H" pulse width SCK16 to SCK17 CLK_COMP SCK0 to SCK4, Serial clock CLK_LCPnA SCK8 to SCK12 SLSH "L" pulse width SCK16 to SCK17 CLK_COMP SCK0 to SCK4,...
  • Page 191 S6J3350 Series SLSH SHSL SLOV SHIXE IVSHE * Changes when writing to the TDR register Slave mode Page 190 of 307 Document Number: 002-10634 Rev. *J...
  • Page 192 S6J3350 Series (5) Serial Chip Select Used (SCSCR: CSEN = 1) ◼ Mark level "H" of serial clock output (SMR, SCSFR: SCINV = 0) ◼ Inactive level "H" of serial chip select (SCSCR, SCSFR: CSLVL = 1) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10 % / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 193 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0, SCK1, SCK2_1, Master SCK3_1, SCK4, mode SCK8 to SCK12, round CLK_LCPnA CLK_LCPnA SCS0x, SCS1x, operation SCS2x_1, (CL = SCS3x_1, SCS4, 20pF, SCS8x to SCS12x = -5mA, SCK16 to SCK17 SCK ↓...
  • Page 194 S6J3350 Series SCS input CSDE CSHE CSSE SCK input (Normal synchronous transfer) (SPI compatible) Slave mode SCSx output SCSy output SCK output Clock switching example by master mode round operation (x,y=0, 1, 2, 3: x and y are different value) Page 193 of 307 Document Number: 002-10634 Rev.
  • Page 195 S6J3350 Series (6) Serial Chip Select Used (SCSCR: CSEN = 1) ◼ Serial clock output signal detect level "L" (SMR, SCSFR: SCINV = 1) ◼ Serial chip select inactive level "H" (SCSCR, SCSFR: CSLVL = 1) : Recommended operating conditions, Vcc3 = 3.3 V ±0.3 V, Vcc5 = DVcc = 5.0 V ± 10% / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 196 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0, SCK1, SCK2_1, SCK3_1, SCK4, Master SCK8 to SCK12, mode CLK_LCPnA CLK_LCPnA SCS0x, SCS1x, round SCS2x_1, operation SCS3x_1, SCS4, (CL = 20pF, SCS8x to SCS12x = -5mA, SCK16 to SCK17 = 5mA) SCK ↑...
  • Page 197 S6J3350 Series SCS input CSDE CSHE CSSE SCK input (Normal synchronous transfer) (SPI compatible) Slave mode SCSx output SCSy output SCK output Clock switching example by master mode round operation (x,y=0, 1, 2, 3: x and y are different value) Page 196 of 307 Document Number: 002-10634 Rev.
  • Page 198 S6J3350 Series (7) Serial Chip Select Used (SCSCR: CSEN = 1) ◼ Serial clock output signal detect level "H" (SMR, SCSFR: SCINV = 0) ◼ Serial Chip select inactive level "L" (SCSCR, SCSFR: CSLVL = 0 : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10 % / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 199 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0, SCK1, SCK2_1, SCK3_1, SCK4, Master SCK8 to SCK12 mode CLK_LCPnA CLK_LCPnA SCS0x, SCS1x, round SCS2x_1, operation SCS3x_1, SCS4, (CL = 20pF, SCS8x to SCS12x = -5mA, SCK ↓ → SCS ↑ SCK16 to SCK17 = 5mA) CLK_COMP...
  • Page 200 S6J3350 Series CSDE SCS input CSHE CSSE SCK input (Normal synchronous transfer) (SPI compatible) Slave mode SCSx output SCSy output SCK output Clock switching example by master mode round operation (x,y=0, 1, 2, 3: x and y are different value) Page 199 of 307 Document Number: 002-10634 Rev.
  • Page 201 S6J3350 Series (8) Serial Chip Select Used (SCSCR: CSEN = 1) ◼ Serial clock output signal detect level "L" (SMR, SCSFR: SCINV = 1) ◼ Serial Chip select inactive level "L" (SCSCR, SCSFR: CSLVL = 0) : Recommended operating conditions, Vcc3 = 3.3 V ±0.3 V, Vcc5 = DVcc = 5.0 V ± 10 % / 3.3V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 202 S6J3350 Series Value Parameter Symbol Pin Name Conditions Unit Remarks SCK0, SCK1, SCK2_1, SCK3_1, SCK4, Master SCK8 to SCK12, mode CLK_LCPnA SCS0x, SCS1x, round CLK_LCPnA SCS2x_1, operation SCS3x_1, SCS4, (CL = 20pF, SCS8x to SCS12x = -5mA, SCK16 to SCK17, = 5mA) SCK ↑...
  • Page 203 S6J3350 Series CSDI SCS output CSHI CSSI SCK output (Normal synchronous transfer) (SPI compatible) Master mode CSDE SCS input CSHE CSSE SCK input (Normal synchronous transfer) (SPI compatible) Slave mode SCSx output SCSy output SCK output Clock switching example by master mode round operation (x,y=0, 1, 2, 3: x and y are different value) Page 202 of 307 Document Number: 002-10634 Rev.
  • Page 204 S6J3350 Series LIN interface (v2.1) (LIN communication control interface (v2.1)) timing (SMR: MD2-0 = 0b011) (1) External Clock Selected (BGR: EXT = 1) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10% / 3.3 V ± 0.3 V, Vcc53 = 5.0 V ±...
  • Page 205 S6J3350 Series C timing (SMR: MD2-0 = 0b100) : Recommended operating conditions, Vcc5 = Vcc53 = 5.0 V ±10 %, V 12 = 1.15V ±0.06 V, V = 0.0 V) Fast Standard Mode Mode Parameter Symbol Pin Name Conditions Unit Remarks SCL0, SCL1, SCL4, SCL clock...
  • Page 206 S6J3350 Series SUSTA SUDAT HDSTA HDDAT HIGH HDSTA SUSTO Page 205 of 307 Document Number: 002-10634 Rev. *J...
  • Page 207 S6J3350 Series Timer Input 9.1.4.7 : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10 %, Vcc53 = 5.0 V ± 10 % / 3.3 V ± 0.3 V, V = DV = 0.0 V, V 12 = 1.15 V ±...
  • Page 208 S6J3350 Series QPRC timing 9.1.4.8 : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, Vcc5 = DVcc = 5.0 V ± 10 %, Vcc53 = 5.0 V ± 10 % / 3.3 V ± 0.3 V, V = DV = 0.0 V, V 12 = 1.15 V ±...
  • Page 209 S6J3350 Series AUBU BUAD ADBD BDAU BUAU AUBD BDAD ADBU Page 208 of 307 Document Number: 002-10634 Rev. *J...
  • Page 210 S6J3350 Series AIN/BIN Page 209 of 307 Document Number: 002-10634 Rev. *J...
  • Page 211 S6J3350 Series Trigger Input 9.1.4.9 : Recommended operating conditions, Vcc3 = 3.3 V ±0.3V, Vcc5 = DVcc = 5.0 V ± 10 %, Vcc53 = 5.0 V ± 10% / 3.3 V ± 0.3 V, V = DV = 0.0 V, V 12 = 1.15V ±...
  • Page 212 S6J3350 Series NMI Input 9.1.4.10 : Recommended operating conditions, Vcc5 = 5.0 V ± 10 %, V = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Input pulse width NMIX NMIL − NMIX input timing NMIL NMIX Page 211 of 307 Document Number: 002-10634 Rev.
  • Page 213 S6J3350 Series Low Voltage Detection (External Voltage) 9.1.4.11 Low-voltage detection (external low-voltage detection) : Recommended operating conditions, V = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks VCC5 Supply voltage range VCC3 When power- supply voltage VCC5 *1 *5 Detection voltage...
  • Page 214 S6J3350 Series Low-voltage detection (1.15 V power supply low-voltage detection) : Recommended operating conditions, V = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Supply voltage range VCC12 1.09 1.21 RDP12 When power- Detection voltage *1 *2 VCC12 0.7125 0.8125...
  • Page 215 S6J3350 Series Low Voltage Detection (Internal Voltage) 9.1.4.12 Low-voltage detection (internal low-voltage detection for LVDL0) : Recommended operating conditions, V = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Supply voltage range 1.05 1.21 RDP5 When power- *1 *2 Detection voltage 0.75...
  • Page 216 S6J3350 Series High Current Output Slew Rate 9.1.4.13 Recommended operating conditions, 53,DV = 5.0 V ± 10 %, V 3 = 3.3 V ± 0.3 V, V 12 = 1.15 V ± 0.06 V, V = DV = AV = 0.0 V) Value Parameter Symbol...
  • Page 217 S6J3350 Series External bus interface timing 9.1.4.14 Clock output timing : Recommended operating conditions, Vcc53 = 5.0 V ± 10 %, VSS = 0.0 V) (External load capacitance 16 pF) Value Parameter Symbol Pin Name Conditions Unit Remarks Cycle time MCLK 2mA is 62.5...
  • Page 218 S6J3350 Series Common timing between read and write : Recommended operating conditions, Vcc53 = 5.0 V ± 10 %, V = 0.0 V) (External load capacitance 16 pF) Value Parameter Symbol Pin Name Conditions Unit Remarks Cycle time MCLK 62.5 (without MRDY) If using MRDY, Cycle time...
  • Page 219 S6J3350 Series Read timing : Recommended operating conditions, Vcc53 = 5.0 V ± 10 %, V = 0.0 V) (External load capacitance 16 pF) Value Parameter Symbol Pin Name Conditions Unit Remarks MOEX, Data setup time MDATA00 to 21+t "CMOS Schmitt input" MDATA15 and "Disable noise MOEX,...
  • Page 220 S6J3350 Series Write timing : Recommended operating conditions, Vcc53 = 5.0 V ± 10 %, V = 0.0 V) (External load capacitance 16 pF) Value Parameter Symbol Pin Name Conditions Unit Remarks MWEX delay time MCLK, MWEX Byte mask delay MCLK, time MDQM0 to MDQM1...
  • Page 221 S6J3350 Series DDR-HSSPI 9.1.4.15 (1) DDR-HSSPI Interface Timing (SDR Mode) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks when HSSPI clock cycle M_SCLK0 Quad Page Program...
  • Page 222 S6J3350 Series M_SCLK0 G_SCLK0 spcnt delayed sample clock isdata ihdata G_SDATA0_0-3, M_SDATA0_0-3, valid M_SDATA1_0-3 G_SDATA1_0-3 (input timing) oddata ohdata G_SDATA0_0-3, M_SDATA0_0-3, valid M_SDATA1_0-3 G_SDATA1_0-3 (output timing) odsel ohsel GSSEL0, 1 M_SSEL0,1 valid (output timing) Page 221 of 307 Document Number: 002-10634 Rev. *J...
  • Page 223 S6J3350 Series (2) DDR-HSSPI Interface Timing (DDR Mode) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks HSSPI clock cycle M_SCLK0 12.5 M_SCLK↑...
  • Page 224 S6J3350 Series M_SCLK0 G_SCLK0 spcnt delayed sample clock isdata ihdata G_SDATA0_0-3, M_SDATA0_0-3, valid M_SDATA1_0-3 G_SDATA1_0-3 (input timing) oddata oddata ohdata ohdata G_SDATA0_0-3, M_SDATA0_0-3, valid valid M_SDATA1_0-3 G_SDATA1_0-3 (output timing) odsel ohsel GSSEL0, 1 M_SSEL0,1 valid (output timing) Page 223 of 307 Document Number: 002-10634 Rev.
  • Page 225 S6J3350 Series Hyper BUS 9.1.4.16 (1) Hyper Bus Write Timing (HyperFlash) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Hyper Bus clock cycle M_CK 10.0 CKCYC...
  • Page 226 S6J3350 Series (2) Hyper Bus Write Timing (HyperRAM) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Hyper Bus clock cycle M_CK 10.0 CKCYC CS↑↓...
  • Page 227 S6J3350 Series (3) Hyper Bus Read Timing (HyperFlash) : Recommended operating conditions, Vcc3 = 3.3 V ± 3.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Hyper Bus clock cycle M_CK 10.0 RDSCYC CS↑↓...
  • Page 228 S6J3350 Series (4) Hyper Bus Read Timing (HyperRAM) : Recommended operating conditions, Vcc3 = 3.3 V ± 0.3V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Hyper Bus clock cycle M_CK 10.0 RDSCYC CS↑↓...
  • Page 229 S6J3350 Series Ethernet AVB 9.1.4.17 (1) Ethernet Receive Timing : Recommended operating conditions, Vcc53 = Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks RXCLK cycle RXCLK 40.0 RXCYC...
  • Page 230 S6J3350 Series (2) Ethernet Transmit Timing : Recommended operating conditions, Vcc53 = Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks TXCLK cycle TXCLK 40.0 TXCYC COL/CRS input setup 12.0 CRXS...
  • Page 231 S6J3350 Series (3) MDIO Timing : Recommended operating conditions, Vcc53 = Vcc3 = 3.3 V ± 0.3 V, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks MDC cycle 400.0 MDCYC (CL = 20pF, MDIO input setup time MDIO 100.0...
  • Page 232 S6J3350 Series Port Noise Filter 9.1.4.18 : Recommended operating conditions, V 53,DV 5 = 5.0 V ± 10 %, V = DV = AV = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Width for input ALL GPIO −...
  • Page 233 S6J3350 Series Power and Reset Sequence 9.1.4.19 VCC5 and VCC12 sequence : Recommended operating conditions, VSS = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks Wait time from LVDH1 level detection to falling VCC12 − FV12 VCC12 VCC12 stabilization VCC12 14.2 −...
  • Page 234 S6J3350 Series Case1) "PSC_1 H --> L --> H transition by VCC5” Note: − RSTX controlled by VCC5. − VCC12 and AVCC5 controlled by PSC_1. − VCC53, VCC3, AVCC3_DAC and DVCC controlled by PSC_1. Can be controlled by VCC5 GPIO also. −...
  • Page 235 S6J3350 Series Case2-1) "PSC_1 H --> L --> H transition by User Program” VCC5 > V DLAT VCC5 PSC_1 VCC12 RDLAT RHYS RDLAT RSTX No timing specification of VCC12 and RSTX PSC_1 Transition PSC_1=L VCC12=OFF VCC12=ON Note: − VCC12 controlled by PSC_1. −...
  • Page 236 S6J3350 Series Case2-2) "PSC_1 H --> L --> H transition by User Program” Note: − VCC12 and AVCC5 controlled by PSC_1. − VCC53, VCC3, AVCC3_DAC and DVCC controlled by PSC_1. Can be controlled by VCC5 GPIO also. *1: VCC12 can be fully depleted or not full depleted. Page 235 of 307 Document Number: 002-10634 Rev.
  • Page 237 S6J3350 Series VCC12 and RSTX Sequence : Recommended operating conditions, VSS = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks RSTX -> VCC12 fall VCC12, − FV12RST interval time RSTX VCC12 -> RSTX rise VCC12, − RV12RST interval time RSTX VCC5 >...
  • Page 238 S6J3350 Series RSTX and MODE Sequence : Recommended operating conditions, Vcc5 = 5.0 V ± 10 % / 3.3 V ± 0.3V, VSS = 0.0 V) Value Parameter Symbol Pin Name Conditions Unit Remarks RSTX↑ -> MODE↑ RSTX, tMOD − MODE delay time Reset and mode input...
  • Page 239 S6J3350 Series A/D Converter 9.1.5 Electrical Characteristics 9.1.5.1 Recommended operating conditions, V 5 = 5.0 V ± 10 %, V 12 = 1.15 V ± 0.06 V, V = AV = 0.0 V) Conditions Parameter Symbol Pin Name Unit Remarks Resolution −...
  • Page 240 S6J3350 Series Notes on A/D converters 9.1.5.2 About the Output Impedance of an External Circuit for Analog Input When the external impedance is too high, the analog voltage sampling time may become insufficient. In this case, we recommend attaching a capacitor (about 0.1 µF) to an analog input pin. Analog input circuit model Comparator Analog input...
  • Page 241 S6J3350 Series Glossary 9.1.5.3 Resolution: Analog change that can be identified by an A/D converter Integral linearity error: Deviation of the straight line connecting the zero transition point ("0000 0000 0000" <--> "0000 0000 0001") and full-scale transition point ("1111 1111 1110" <--> "1111 1111 1111") from actual conversion characteristics includes zero transition error, full-scale transition error, and non linearity error.
  • Page 242 S6J3350 Series Integral linearity error Differential linearity error Ideal characteristics Actual conversion N + 1 Actual conversion characteristics characteristics {1 LSB (N - 1) + V (measured value) (measured value) N - 1 Actual conversion (N+1)T characteristics (measured (measured value) value) Ideal characteristics (measured value)
  • Page 243 S6J3350 Series FLASH Memory 9.1.6 Electrical Characteristics 9.1.6.1 Rating Parameter Unit Remarks Large sector Internal preprogramming time included 8kB sector Sector erase time Internal preprogramming time included 4kB sector Internal preprogramming time included 16bit write time(Program) µs System-level overhead time excluded 32bit write time(Program) µs System-level overhead time excluded...

  • Page 244: Acronyms

    S6J3350 Series 10. Acronyms Acronym Description Acronym Description A/D converter Analog digital converter LLPP Low latency peripheral port Analog digital converter Low voltage detector Advanced high performance bus Microcontroller unit Advanced microcontroller bus Multi-function serial interface AMBATM architecture Noise filter Advanced peripheral bus Non maskable interrupt ATCM...

  • Page 245: Ordering Information

    S6J3350 Series 11. Ordering Information Part Number *1 Package S6J335EKSCSE2000A S6J335EKSESE20000 208-pin plastic TEQFP(LEW208) S6J335EKBESE20000 S6J335EJBESE20000 176-pin plastic TEQFP(LEV176) Page 244 of 307 Document Number: 002-10634 Rev. *J...

  • Page 246: Errata

    S6J3350 Series 12. Errata This section describes the errata for the S6J3350 Series. Details include errata trigger conditions, scope of impact, available workarounds, and silicon revision applicability. Contact your local Cypress Sales Representative if you have questions. Part Numbers Affected Part Number S6J335Dxxx S6J335Exxx...
  • Page 247 S6J3350 Series ■ Workaround Workaround 1: This workaround avoids submitting a transmission request in the critical time window of about one bit time before the sample point of the 3 bit of intermission field when on other pending transmission request exists: •...

  • Page 248: Appendix

    S6J3350 Series 13. Appendix 13.1 Application 1: JTAG Tool Connection This is an application example of JTAG tool connection. See the relevant application note 002-03898 in detail. Page 247 of 307 Document Number: 002-10634 Rev. *J...

  • Page 249: Major Changes

    S6J3350 Series 14. Major Changes Page Section Change Results Rev.*A 2.Function List Revised Chip ID and Revision as below: 2.2Optional function Error) Function Digit Revision Chip ID S,U,T,V 0x10120000 A,C,E,G 0x1012A000 B,D,F,H 0x10122000 Correct) Function Digit Revision S,U,T,V 0x10122100 A,C,E,G 0x10128100 B,D,F,H 0x10120100...
  • Page 250 S6J3350 Series Page Section Change Results 8.Precautions and Revised as below: Handling Devices Error) 8.1.1Precautions for (1) Preventing Over-Voltage and Over-Current Conditions Product Design Exposure to voltage or current levels in excess of maximum ratings at any pin is likely to cause deterioration within the device, and in extreme cases leads to permanent damage of the device.
  • Page 251 S6J3350 Series Page Section Change Results 9.Electric Revised Rating Min Spec as below: Characteristics Error) Power supply voltage, V 5 , Rating, Min, 2.6 9.1.2Recommended Power supply voltage, V 3 , Rating, Min, 2.6 operating condition Correct) Power supply voltage, V 5 , Rating, Min, 2.7 Power supply voltage, V 3 , Rating, Min, 2.7...
  • Page 252 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Characteristics Error) 9.1.4.5 Power-on Value Parameter Symbol Conditions Unit Remarks Name Conditions Power off time VCC5 VCC5: Power ramp rate dV/dt VCC5 0.2V to V/µs 2.6V VCC5: Undetected Between |dV/dt| VCC5 mV/µs power ramp rate...
  • Page 253 S6J3350 Series Page Section Change Results Revised as below: 9.Electric Error) Characteristics 9.1.4.5 Power-on *1: This specification is at 1V/μs of power ramp rate. Conditions *2: VCC5 must be held below 0.2V for a minimum period of tOFF. *3: Power ramp rate must be 1V/us or less from 0.2V to 2.6V. Power-on can detect by satisfying power ramp rate when power off time is satisfied.
  • Page 254 S6J3350 Series Page Section Change Results 9.Electric Revised Max of Low-voltage detection time as below: Characteristics Low-voltage detection (external low-voltage detection) 9.1.4.11 Low Error) Voltage Detection Low-voltage detection μs time (External Voltage) Correct) Low-voltage detection μs time 9.Electric Revised as below: Characteristics Low-voltage detection (1.15 V power supply low-voltage detection) 9.1.4.11 Low...
  • Page 255 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Characteristics Error) Value Conditio 9.1.4.12Low Voltage Parameter Unit Remarks Name Detection (Internal Supply voltage 1.05 1.21 Voltage) RDP5 range When power- Detection 0.75 0.85 0.95 supply voltage voltage falls When power- Hysteresis supply...
  • Page 256 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Characteristics Error) Value 9.1.4.12Low Voltage Parameter Symbol Pin Name Conditions Unit Detection (Internal Supply voltage 1.05 1.21 Voltage) RDP5 range Detection voltage 0.775 0.875 0.975 RDLBT (before trimming) Detection voltage 0.844 0.875 0.906...
  • Page 257 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Error) Characteristics 9.1.4.15 DDR- (16-1) DDR-HSSPI Interface Timing (SDR mode) HSSPI Value Parameter Symbol Pin Name Conditions Unit Remarks HSSPI clock cycle M_SCLK0 M_SCLK↑ -> tcyc delayed sample clock↑ spcnt M_SDATA ->...
  • Page 258 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Error) Characteristics 9.1.4.15 DDR- (16-2) DDR-HSSPI Interface Timing (DDR mode) HSSPI Value Parameter Symbol Pin Name Conditions Unit Remarks HSSPI clock cycle M_SCLK0 M_SCLK↑ -> tcyc delayed sample clock↑ spcnt M_SDATA ->...
  • Page 259 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Characteristics Error) 9.1.4.16 Hyper BUS (16-1) Hyper Bus Write Timing (HyperFlash) Value Parameter Symbol Pin Name Conditions Unit Remarks CS↑↓ -> CK↑ M_CS#_1,2 (CL = 20pF, Chip Select setup time IOL=-10mA, CK↓...
  • Page 260 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Characteristics Error) 9.1.4.16 Hyper BUS (16-3) Hyper Bus Read Timing (HyperFlash) Value Parameter Symbol Pin Name Conditions Unit Remarks CS↑↓ -> CK↑ M_CS#_1,2 Chip Select setup time DQ -> CK↑↓ M_DQ7-0 1.25 Input setup time...
  • Page 261 S6J3350 Series Page Section Change Results 9.Electric Revised as below: Characteristics Error) 9.1.4.16 Hyper BUS (16-4) Hyper Bus Read Timing (HyperRAM) Value Parameter Symbol Pin Name Conditions Unit Remarks CS↑↓ -> CK↑ M_CS#_1,2 Chip Select setup time DQ -> CK↑↓ M_DQ7-0 1.25 Input setup time...
  • Page 262 S6J3350 Series Page Section Change Results 11.Ordering Revised part number as below: Information Error) Part number S6J335EKSB******* Correct) Part number S6J335EKSC******* Rev.*B Revised as below: 3.Product Description Error) 3.2 Product 12bit resolution, 2 unit Description 64 channels of analog input for TEQFP208 48 channels of analog input for TEQFP176 35 channel of analog input for TEQFP144 External trigger and timer trigger are available.
  • Page 263 S6J3350 Series Page Section Change Results 6.Port Description Revised the below: 6.1 Port Description Error) ADC Analog [0 to 63] input pin Correct) ADC Unit0 [ch.0 to ch.31] input pin ADC Unit1 [ch.32 to ch.63] input pin Revised the below: 8.Precautions and Processing and Protection of Pins Handling Devices...
  • Page 264 S6J3350 Series Page Section Change Results Revised as below: 9.Electric Error) Characteristics 9.1.2 Recommended The detection/release threshold values of following LVD channels are potentially below supply range defined in operating condition 9.1.2 Recommended operating condition (refer to "9.1.4.11 Low Voltage Detection (External Voltage)” and “9.1.4.12 Low Voltage Detection (Internal Voltage)"...
  • Page 265 S6J3350 Series Page Section Change Results Revised as below: 9.Electric Error) Characteristics 9.1.4.3.Internal clock - Note that Ta=125 condition is not supported in this product type. timing When using SSCG_PLL output for these internal clock, the MAX value of frequency has the following restrictions.
  • Page 266 S6J3350 Series Page Section Change Results Revised as below: 9.Electric Error) Characteristics 9.1.4.6Multi-Function C timing (SMR:MD2-0=0b100) Serial : Recommended operating conditions, Vcc5=Vcc53=5.0 V ±10%, V 12=1.15V ±0.06V, V =0.0 V) Standard High-Speed Mode Mode Parameter Symbol Pin Name Conditions Unit SCL0, SCL1, SCL4, =50pF, SCL clock frequency...
  • Page 267 S6J3350 Series Page Section Change Results Added sentences as below: 9.Electric Error) Characteristics 9.1.4.11.Low Voltage Value Parameter Symbol Pin Name Conditions Unit Remarks Detection (External Voltage) When power-supply Detection voltage VCC12 0.7841 0.8125 0.8410 voltage falls RDLAT (after trimming) Typ±3.5% Correct) Value Parameter...
  • Page 268 S6J3350 Series Page Section Change Results 1.Overview Error) 1.2 Document Document Document Type Definition Primary User definition Code Investigator S6J3350 The function and its characteristics and hardware 002-10634 Datasheet are specified quantitatively. engineer S6J3300 The function and its operation of Software 002-10185 hardware manual...
  • Page 269 S6J3350 Series Page Section Change Results 2.Function List Error) 2.1 Product lineup Function S6J3310 S6J3320 S6J3330 S6J3340 Remark General Option See 2.2.2 Purpose I/O 12bit-A/D 2 unit - 48 input ports (Max) See 2.2.2 converter Correct) Function S6J3310 S6J3320 S6J3330 S6J3340 Remark General...
  • Page 270 S6J3350 Series Page Section Change Results Error) 3.Product Description Power Domain (PD) 3.2 Product description The product series supports the power off control of PD1, PD2 (including PD3 and 5) and PD6. Correct) The product series supports the power off control of PD1, PD2 (including PD3 and 5), PD4_0, PD4_1 and PD6.
  • Page 271 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics Power consumption 1500 9.1.1 Absolute ≤2000mW Operating temperature Maximum Rating ≤1200mW Correct) C≤T ≤105 2000 Power consumption C≤T ≤125 1100 ≤2000mW Operating temperature ≤1100mW 9. Electric Error) Characteristics PD≤2000mW Operating temperature 9.1.2 PD≤1200mW Recommended...
  • Page 272 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics LVDL0 9.1.2 LVDL1 Recommended LVDL2 operating condition LVDH0 LVDH1 LVDH2 Detection voltage of the external low voltage detection reset (initial) is 2.6V±3.5%*2 *3 or 4.0V±3.5%*1. This detection voltage level setting is below the minimum operation assurance voltage (2.7V*2 *3 or 4.0V*1) .
  • Page 273 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics =25C. Power only supplies to Backup RAM and system 9.1.3 DC µA controllers. When using 4MHz characteristics crystal for main oscillator. Timer mode =25C. Power only supplies to CCT5 Backup RAM and system VCC5 µA controllers.
  • Page 274 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics μs Power off time VCC5 9.1.4.5 Power-on Conditions Correct) μs Power off time VCC5 9.Electric Error) Characteristics S6J335xxSC, S6J335xxUC, S6J335xxTC, S6J335xxVC, 9.1.4.11Low Voltage S6J335xxAC, S6J335xxBC, S6J335xxCC, S6J335xxDC, Detection (External S6J335xxEC, S6J335xxFC, S6J335xxGC, S6J335xxHC Voltage) Correct) S6J335xxSx, S6J335xxUx, S6J335xxTx, S6J335xxVx,...
  • Page 275 S6J3350 Series Page Section Change Results 9. Electric Low-voltage detection (external low-voltage detection) Characteristics Error) 9.1.4.11 Low Value Parameter Symbol Conditions Unit Remarks Voltage Detection Name (External Voltage) Supply voltage VCC5 range When power- Detection supply voltage VCC5 voltage falls and DLBT (before detection level is...
  • Page 276 S6J3350 Series Page Section Change Results 9. Electric Low-voltage detection (1.15 V power supply low-voltage detection) Characteristics Error) 9.1.4.11 Low Value Parameter Symbol Conditions Unit Remarks Voltage Detection Name (External Voltage) Supply voltage VCC12 1.09 1.21 RDP12 range Detection When power- voltage VCC12 0.7125...
  • Page 277 S6J3350 Series Page Section Change Results 9. Electric Low-voltage detection (internal low-voltage detection for LVDL1) Characteristics Error) 9.1.4.12 Low Value Parameter Symbol Conditions Unit Remarks Voltage Detection Name (Internal Voltage) Supply voltage 1.05 1.21 RDP5 range When power- Detection 0.775 0.875 0.975 supply voltage...
  • Page 278 S6J3350 Series Page Section Change Results Correct) Value Parameter Symbol Conditions Unit Remarks Name Supply voltage 1.05 1.21 RDP5 range Detection When power- voltage *1 *2 0.775 0.875 0.975 supply voltage RDLBT (before falls trimming) Detection When power- voltage supply voltage *1 *2 0.844 0.875...
  • Page 279 S6J3350 Series Page Section Change Results Rev. *D 2. Function List CAN-FD RAM (ECC supported) 2.1 Function list Error) 16KB/ch It equivalents to 128 message buffer per channel of CCAN module Correct) 16KB/ch It equivalents to 128 message buffer per channel of MCAN module 2.
  • Page 280 S6J3350 Series Page Section Change Results 9. Electric Error) 12≤ V Characteristics 12≤ V 9.1.1 Absolute Power supply voltage -0.3 +1.8 12≤ DV Maximum Rating 12≤ AV Correct) Power supply voltage -0.3 +1.8 12≤ AV 9. Electric Error) Characteristics Total maximum clamp current Σ|I SPECIAL SPEC CLAMP...
  • Page 281 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics − In the case of use in VCC5 = AVCC5 = DVCC of conditions, please launch the power supply in 9.1.2 the following sequence. Recommended Required power supply sequence is the following: operating condition VCC5 ->...
  • Page 282 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics Value Paramet Symb Conditio 9.1.3 DC Unit Remarks characteristics =-40 ~ 105C CPU:240MHz, HPM:120MHz (CPU:200MHz, Normal HPM:200MHz) operation =-40 ~125C CPU:180MHz, HPM:90MHz, CC12 Power =-40 ~ 105C supply CPU:240MHz, current HPM:120MHz Flash (CPU:200MHz,...
  • Page 283 S6J3350 Series Page Section Change Results 9. Electric Error) Rating Characteristics Parameter Unit Remarks 9.1.6.1 Electrical Large sector Characteristics Internal preprogramming time included 8kB sector Sector erase time Internal preprogramming time included 4kB sector Internal preprogramming time included 16bit write System-level overhead time µs time(Program)
  • Page 284 S6J3350 Series Page Section Change Results Rev. *E 1. Overview Error) 1.2 Document Table 1-1 Definition Correct) Table 1-1: Document Definition 2. Function List Error) 2.1 Function List Table 2-1 Correct) Table 2-1: Function Lineup 2. Function List Error) 2.2.1 Basic option Figure 2-1 Correct) Figure 2-1: Option and Part Number for S6J3350 Series...
  • Page 285 S6J3350 Series Page Section Change Results 4. Package and Pin Error) Assignment Figure 4-2: TEQFP-176 4.1.2 TEQFP-176 Pin Assignment Correct) Figure 4-2: TEQFP-176 (S6J335xJyz *1) *1: x, y ,z are selected from the following parameter. x : E, D (Memory Size) y : S, A, B, U, C, D, T, E, F, V, G, H (Option) z : C, D, E (Revision) 4.
  • Page 286 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics Value Paramete Symb Condition 9.1.3 DC Unit Remarks Name characteristics =-40 ~ 105C CPU:240MHz, HPM:120MHz (CPU:200MHz, Normal HPM:200MHz) operation =-40 ~125C CPU:180MHz, HPM:90MHz, CC12 =-40 ~ 105C VCC1 CPU:240MHz, HPM:120MHz (CPU:200MHz, Flash HPM:200MHz)
  • Page 287 S6J3350 Series Page Section Change Results 9. Electric Correct) Characteristics Value Paramete Symb Condition 9.1.3 DC Unit Remarks Name characteristics =-40 ~ 105C CPU:240MHz, HPM:120MHz (CPU:200MHz, Normal HPM:200MHz) operation =-40 ~125C CPU:180MHz, HPM:90MHz, CC12 =-40 ~ 105C VCC1 CPU:240MHz, HPM:120MHz (CPU:200MHz, Flash HPM:200MHz)
  • Page 288 S6J3350 Series Page Section Change Results 9. Electric Error) Characteristics 9.1.3 DC characteristics Correct) Value Paramete Symbo Condition Unit Remarks Name =25C. 4MHz crystal for main oscillator µA PD1=ON, PD4_0=ON, PD4_1=ON =25C. 4MHz crystal for main oscillator. µA PD1=ON, PD4_0=ON or PD4_1=ON =25C.
  • Page 289 S6J3350 Series Page Section Change Results 2: Function List Function: CRC 2.1. Function List Error) 1 unit Correct) 4 units 2: Function List Function: DDR HSSPI 2.1. Function List Error) 2 ch Correct) 1 ch Error) 2. Function List 2.2.2 ID Function Digit Revision Chip ID...
  • Page 290 S6J3350 Series Page Section Change Results 3: Product Description Feature: Reset Error) 3.2. Product Based on Cortex R5F platform Description Following resets are not mounted on this device. INITX − SRSTX − Correct) RSTX pin + MD pin simultaneous assert INITX (Same as INITX pin input) Occurrence factor: Simultaneously inputting “L”...
  • Page 291 S6J3350 Series Page Section Change Results 3: Product Description Feature: Multi-Functional Serial (MFS) 3.2. Product Error) Some ports of MFS have the dedicated I/O for I Description See Port description list in detail. When the voltage supply of I C interface is 5.0 V, it cannot use the I/O cells of 3.3 V voltage supply for the I terminal.
  • Page 292 S6J3350 Series Page Section Change Results 9. Electric Error) Rating Characteristics Parameter Unit Remarks 9.1.6.1 Electrical Large sector Characteristics Internal preprogramming time included 8kB sector Sector erase time Internal preprogramming time included 4kB sector Internal preprogramming time included 16bit write time(Program) µs System-level overhead time excluded 32bit write time(Program)
  • Page 293 S6J3350 Series Page Section Change Results Rev. *G 9. Electric Added the Hysteresis voltage as below. Characteristics 9. 1.3 DC Correct) Value Characteristics Parameter Symbol Pin Name Conditions Unit Remarks P0_00 to CMOS hysteresis 0.05×V P0_20, input level is HYS1 P2_09 to selected P2_19,...
  • Page 294 S6J3350 Series Page Section Change Results Rev. *H 1. Overview Added the Document Definition as below. 1.2 Document Definition Error) Document Type Definition Primary User Document Code The function and its Investigator and S6J3350 Datasheet characteristics are specified 002-10634 hardware engineer quantitatively.
  • Page 295 S6J3350 Series Page Section Change Results 9. Electric Added the *4 in “Remarks” column Characteristics 9.1.4.3 Internal Clock Error) Timing SSCG0 output clock SSCG1 output clock SSCG2 output clock SSCG3 output clock PLL0 output clock PLL1 output clock PLL2 output clock PLL3 output clock Correct) SSCG0 output clock *4...
  • Page 296 S6J3350 Series Page Section Change Results 11. Ordering Revised as below. Information Error) Part Number *1 Package S6J335EKSx******* 208-pin plastic TEQFP(LEW208) Correct) Part Number *1 Package S6J335EKSCSE2000A S6J335EKSESE20000 208-pin plastic TEQFP(LEW208) S6J335EKBESE20000 S6J335EJBESE20000 176-pin plastic TEQFP(LEV176) Rev. *I 3. Product Description Added the below 3.2 Product Description...
  • Page 297 S6J3350 Series Page Section Change Results CHAPTER 3: Deleted the shading parts as below: Product Description Error) 3.2.1. Ethernet Functions Remark Direct Memory Access Interface. - partial store and forward - force max amba burst tx/rc - Priority Queueing (Screening) External FIFO Interface Additional Low Latency TX FIFO Interface for DMA configurations MAC Transmit Block...
  • Page 298 S6J3350 Series Page Section Change Results 6. Port Description Revised the below 6.1 Port Description List Error) Package Pin Number Port Name Description TEQFP TEQFP TEQFP Remark PPG0_TOUT0_1 Base timer 1 output pin (1) Correct) Package Pin Number Port Name Description TEQFP TEQFP...
  • Page 299 S6J3350 Series Page Section Change Results 6. Port Description Revised the below 6.1 Port Description List Error) Package Pin Number Port Name Description TEQFP TEQFP TEQFP Remark PPG15_TOUT0_1 Base timer 31 output pin (1) Correct) Package Pin Number Port Name Description TEQFP TEQFP...
  • Page 300 S6J3350 Series Page Section Change Results 3. Product Description Revised the shading parts as below: 3.2. Product Description Table 3-1: Product Features Error) Feature Description See the Traveo™ Platform Hardware Manual in detail. Stabilization time is as followings. Embedded CR oscillation −...
  • Page 301 S6J3350 Series Page Section Change Results 3. Product Description Revised the shading parts as below: 3.2. Product Description Table 3-1: Product Features Error) Feature Description See the Traveo™ Platform Hardware Manual in detail. Use case assumption is following. Sound system clock −...
  • Page 302 S6J3350 Series Page Section Change Results 4. Package and Pin Removed the shading parts as below: Assignment 4.1.1. TEQFP-208 Pin Package Pin 103 Assignment Error) X1A / P1_12 / EINT13_0 / PPG4_TOUT2_0 / OCU8_OTD1_0 / ICU9_IN1_0 / TOT17_0 / TX2_0 / SCS161_0 Correct) X1A / P1_12 / EINT13_0 / OCU8_OTD1_0 / ICU9_IN1_0 / TOT17_0 / TX2_0 / SCS161_0 4.
  • Page 303 S6J3350 Series Page Section Change Results 6. Port Description Revised the shading parts as below: 6.1. Port Description List Error) Package Pin Number Port Name Description TEQFP TEQFP TEQFP Remark TIN0_1 Reload timer ch.0 event input pin (0) Correct) Package Pin Number Port Name Description TEQFP...
  • Page 304 S6J3350 Series Page Section Change Results 7. Port Configuration Removed the shading parts as below: 7.1 Resource Input Configuration Module Error) RESSEL PORT_ RLT17_ RLT1_U OCU1_ OCU2_ PPG15_ PPG17_ PPG19_ 7.1.1. RIC (0-7) UFSET FSET OTD0 OTD0 TOUT2 TOUT0 TOUT0 RESSEL RIC_RE ADC12B0...
  • Page 305 S6J3350 Series Page Section Change Results 9. Electric Added the shading parts as below: Characteristics 9.1. Electrical Error) Characteristics *2 Take care that DVCC, AVCC5 do not exceed VCC5 at, for example, the power-on time. 9.1.1. Absolute Maximum Rating Correct) *2 Take care that DVCC, AVCC5 do not exceed VCC5 at, for example, the power-on time.

  • Page 306: Document History

    S6J3350 Series Document History Document Title: S6J3350 Series 32-bit Microcontroller Traveo™ Family Document Number: 002-10634 Revision Submission Date Description of Change 5063970 01/25/2016 New Spec. Correct device revision, Chip ID, LVD spec, DDR-HSSPI spec, and Hyper BUS spec 5203759 04/05/2016 For detail, see “Major Changes”.
  • Page 307 S6J3350 Series Revision Submission Date Description of Change - Add an option limitation for Description of A/D Converter of Product Description. - Update Ethernet Support Functions. - Update Base timer allocation 6300353 09/05/2018 - Added 12. Errata For detail, see “Major Changes” - Updated some sentences.

  • Page 308: Sales, Solutions, And Legal Information

    S6J3350 Series Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. ® PSoC Solutions Products PSoC 1 PSoC 3...

This manual is also suitable for:

Cypress traveo s6j3350 seriesCypress traveo s6j335 seriesCypress traveo s6j335ekscse2000aCypress traveo s6j335eksese20000Cypress traveo s6j335ekbese20000Cypress traveo s6j335ejbese20000

Table of Contents