Infineon Technologies CYPRESS Traveo Series Manual page 262

Page Section
248 11.Ordering
Information
Rev.*B
13
3.Product Description
3.2 Product
Description
14
3.Product Description
3.2.Product description
21
4.Package and Pin
22
Assignment
4.2.Package
Dimensions
Document Number: 002-10634 Rev. *J
Revised part number as below:
Error)
Part number
S6J335EKSB*******
Correct)
Part number
S6J335EKSC*******
Revised as below:
Error)
12bit resolution, 2 unit
64 channels of analog input for TEQFP208
48 channels of analog input for TEQFP176
35 channel of analog input for TEQFP144
External trigger and timer trigger are available.
The description of the A/D converter function should be referred in the S6J3300 hardware manual. Though the
chapter of I/O port in Traveo™ Platform Hardware Manual describes another A/D converter function, do not refer
it.
Correct)
12bit resolution, 2 unit(Unit0 is possible to select channels 0-31. Unit1 is possible to select channels 32-63.)
64 channels of analog input for TEQFP208
48 channels of analog input for TEQFP176
35 channel of analog input for TEQFP144
External trigger and timer trigger are available.
The description of the A/D converter function should be referred in the S6J3300 hardware manual. Though the
chapter of I/O port in Traveo™ Platform Hardware Manual describes another A/D converter function, do not refer
it.
A/D Channel Control Register (ADC12Bn_CHCTRL0)[bit5:0] ANIN[5:0] : Analog Input Selection bits.
This register setting is possible of channel 0-31 (the register value is 00_0000 to 01_1111).
Revised as below:
Correct)
PSC (PSC_1) output is used for external 1.2V power supply module control and automatically switched with the
following condition.
"High": Request to supply VCC12
- "Power ON Reset" is released
Power Supply
- CPU wakes up from PSS shutdown mode
Control
"Low": Request to stop supplying VCC12
(PSC)
- CPU transfers from RUN mode to PSS shutdown mode.
For timing chart of output signals include PSC in detail, see the "S6J3300 hardware manual" and chapter "State
Transition"
Revised as below:
4.2.3.TEQFP144
Error)
Figure 4 6: TEQFP144
Figure 4 7: TEQFP144
The package dimension of TEQFP144 (0.4mm Pitch) is the provisional version.
Correct)
Figure 4 6: TEQFP144 (0.5mm Pitch)
Figure 4 7: TEQFP144 (0.4mm Pitch)
The package dimension of TEQFP144 (0.4mm Pitch) is the formal version.
Change Results
S6J3350 Series
Page 261 of 307