Transmitting A Voice Memory Content; Dtransmitting; Drepeatedly Transmitting - Icom IC-705 Advanced Manual

6. VOICE TX MEMORY FUNCTION

Transmitting a Voice memory content

You can transmit the Voice TX memory contents
once, or repeatedly. This is useful for transmitting
your call sign, contest number or name in some
contests, or repeatedly calling CQ.

DTransmitting

Transmits the prerecorded content. (p. 6-1)
1. Display the VOICE TX screen.
» VOICE
2. Touch the desired Voice memory key
[T1] ~ [T8].
The transmission's remaining time
• Transmits the recorded content once.
3. To close the VOICE TX screen, push
When an external keypad is connected:
You can transmit the preset contents in the
Voice TX memory (T1 ~ T8) from an external
device by setting the "External Keypad," and
then connecting an external keypad to [KEY] on
the IC-705.
» SET > Connectors > External Keypad

DRepeatedly transmitting

1. Display the VOICE TX screen.
» VOICE
2. Touch the desired Voice memory key
[T1] ~ [T8] for 1 second.
Repeat icon
• Repeatedly transmits the recorded content.
L Information
• The recorded content is repeatedly transmitted for 10
minutes unless you manually stop transmission by
touching the selected memory.
• The Memory Timer counts down.
• is displayed while repeatedly transmitting.
• You can set the pause interval between the repeated
transmissions in "Repeat Time" on the VOICE TX SET
screen. During this interval, the transceiver returns to
.
receive. (p. 6-4).
• After 10 minutes have passed, and all of the recorded
content in the memory is transmitted, the transceiver
automatically returns to receive.
• When a signal is received in the interval between
transmissions, the transceiver pauses the next
transmission until the signal disappears. However, if
the squelch is set to open, the transceiver repeatedly
transmits after the repeat interval time expires, even
signals are received.
3. To close the VOICE TX screen, push
TIP:
If the "DATA OFF MOD" is set to "USB" or "WLAN,"
Voice TX memories can not be transmitted.
» SET > Connectors > MOD Input
> DATA OFF MOD
6-3
The transmission's remaining time
.