Icom IC-705 Advanced Manual page 129

12. GPS OPERATION (ADVANCED)
GPS SET
» GPS
GPS Auto TX
Selects an option for the GPS automatic
transmission function.
This function automatically transmits the current
position data received from a GPS receiver, as
well as any entered GPS message, at the set
interval.
NOTE: When "GPS TX Mode" is "NMEA," set
"GPS Select" to "ON." If you set to "Manual" or
"OFF," the current position data is automatically
transmitted.
• OFF: Does not automatically transmit the
position data. (When you push [PTT], the
transceiver transmits the position data.)
• 30 sec to 30 min:
Transmits the current position data at the
selected interval (30 seconds, or 1, 3, 5,
10, or 30 minutes).
(Default: OFF)
12-46