Entering A Voice Tx Memory Name; Transmitting A Voice Memory Content; D Transmitting - Icom IC-9700 Advanced Manual

3. VOICE TX MEMORY FUNCTION

Entering a Voice TX memory name

You can assign a name to recorded Voice memories.
[Example: Entering "Contest" in Memory T1]
1. Display the VOICE TX screen in a Voice mode.
LVoice mode: SSB, AM or FM modes.
» VOICE > REC/SET > REC
MENU
• Opens the VOICE TX RECORD screen.
2. Touch [p] or [q] to display the desired Voice
memories "T1" ~ "T4" or "T5" ~ "T8," and then
touch the memory for 1 second.
3. Touch "Edit Name."
• Opens the Name editing screen.
4. Enter a name of up to 16 characters, and then
touch [ENT] to save.
L See "Keyboard entering and editing" in the BASIC
MANUAL for details.
5. To close the VOICE TX RECORD screen, push
.
EXIT

Transmitting a Voice memory content

You can transmit the Voice TX memory contents once,
or repeatedly. This is useful for transmitting your call
sign, contest number or name in some contests, or
repeatedly calling CQ.

D Transmitting

Transmits the prerecorded content. (p. 3-1)
1. Display the VOICE TX screen in a Voice mode.
L(Voice mode: SSB, AM, FM or DV mode).
» VOICE
MENU
2. Touch the desired Voice memory key [T1] ~ [T8].
• Transmits the recorded content once.
Playing time
3. To close the VOICE TX screen, push
TIP: How to cancel a Voice TX transmission
• Touch any keys other than [TX LEVEL] on the VOICE
TX screen
• Push or .
EXIT V/M
• Touch the frequency's MHz digits or the Memory
channel number
• Turn OFF the transceiver
3-2
.
EXIT