Dlinking To A Reflector - Icom IC-705 Advanced Manual

13. D-STAR OPERATION (BASIC)
About Reflectors

DLinking to a reflector

If your repeater is not currently linked to a
reflector, or if you want to change it to another
reflector, follow the steps below. Before linking to
another reflector, BE SURE to unlink any current
reflector. (p. 13-11)
Direct inputting a Reflector
Example: Directly entering "REF010BL."
1. Touch "TO" to select, and then touch "TO"
again.
2. Touch "Reflector."
3. Touch "Link to Reflector."
4. Touch "Direct Input."
5. Touch [+] or [–] to select the reflector type,
reflector number, and module letter, then
touch [SET].
• Returns to the DR screen, and "Link to Reflector"
and entered reflector is displayed in "TO."
6. Hold down [PTT] to link to the reflector.
Direct inputting a Reflector
TX History saves up to 5 reflectors that your
Access repeater linked to before.
Example: Select "REF010BL" in TX History.
1. Touch "TO" to select, and then touch "TO"
again.
2. Touch "Reflector."
3. Touch "Link to Reflector."
4. Touch the reflector that you want to link to.
• Returns to the DR screen, and "Link to Reflector"
and "REF010BL" are displayed in "TO."
5. Hold down [PTT] to link to the reflector.
13-12