Setting Up The Device; Dwhen Using The Internal Gateway Function - Icom IC-705 Advanced Manual

15. ABOUT THE DV GATEWAY FUNCTION

Setting up the device

DWhen using the Internal Gateway function

Connecting to a router
Turn ON the Wireless LAN function, and connect
to a router or a mobile router.
IC-705
Setting the Internal Gateway Settings
1. Open the INTERNAL GATEWAY SETTINGS
screen.
» 2 > DV GW > Internal Gateway Settings
2. Touch to select the item to set.
(Example: "Terminal/AP Call sign")
3. Enter a call sign, and then touch [ENT].
LSee right for details on the setting items and
their options.
4. To close the INTERNAL GATEWAY
SETTINGS screen, push
Router
or
Mobile
router
several times.
15-10
Gateway Repeater (Server IP/Domain)
Enter the gateway repeater's address or domain
name.
LThe address consists of up to 64 characters.
NOTE: You must have your call sign
registered to a gateway server that has the
RS-RP3C installed. Ask the gateway repeater
administrator for details.
Terminal/AP Call sign
Enter the Terminal/AP call sign that is registered
as the access point on the RS-RP3C's Personal
Information screen.
LThe call sign should be 8 characters long.
• Enter spaces before the 8th character if
necessary.
• Enter a desired ID suffix between A to Z, except
for G, I, and S, for the 8th character.
Gateway Type
Selects the gateway type.
LSelect "Global" when operating outside of Japan.
UDP Hole Punch
Selects whether or not to use the UDP Hole
Punch function. This function enables you to
communicate with other station who uses the
Terminal or Access Point mode even if you do not
forward port 40000 of a router. (p. 15-5)
LInformation
• You cannot communicate using this function when
the destination station uses the software that is not
compatible with the UDP Hole Punch function.
• When forwarding port 40000 of a router, select
"OFF."
(Default: Global)
(Default: OFF)