Entering A Group/Memory Name; Dentering A Group Name; Dentering A Memory Name - Icom IC-705 Advanced Manual

7. MEMORY OPERATION

Entering a group/Memory name

You can assign a name of up to 16 characters
to each channel group (00 ~ 99) and Memory
channel.

DEntering a group name

1. Open the MEMORY GROUP screen.
» MEMORY
2. Touch the channel group that you want to
enter a name, for 1 second. (Example: 01)
3. Touch "Edit Name."
4. Enter a group name, then touch [ENT].
5. To close the MEMORY GROUP screen, push
.

DEntering a Memory name

1. Open the MEMORY GROUP screen.
» MEMORY
2. Touch the channel group. (Example: 01)
3. Touch of the channel that you want to enter
a name. (Example: channel 01)
4. Touch "Edit Name."
5. Enter a name, then touch [ENT].
6. To close the MEMORY screen, push
several times.
LThe Memory name is not displayed when the
Mini Scope screen or expanded screen is
displayed.
LYou can also select not to display the Memory
name on the standby screen.
» SET > Display > Memory Name
7-4
Memory name