Copying Memory Content To The Vfo - Icom IC-T10 Advanced Manual

Vhf/uhf dual band transceiver

Hide thumbs Also See for IC-T10:

Table of Contents

MEMORY OPERATION

Copying Memory content to the VFO

It is convenient to operate on a frequency near a

Memory or Call channel in the VFO mode.

1. Repeatedly push [V/M/C] to select the Memory

mode or Call Channel mode.

2. Rotate [DIAL] to select a Memory Channel or Call

channel to copy.

Hold down [S.MW] until three beeps sound.

• The transceiver enters the VFO mode with the

selected channel copied.

2-4

Table of Contents

Table of Contents

Do you have a question about the IC-T10 and is the answer not in the manual?