Dkeyer Set Menu (Cw-Key Set) - Icom IC-705 Advanced Manual

2. ADVANCED OPERATIONS
Operating CW (ADVANCED)

DKeyer Set menu (CW-KEY SET)

In this screen, you can set the memory keyer
repeat time, dash weight, paddle specifications,
key type, and so on.
1. Display the CW-KEY SET screen in the CW
mode.
» KEYER > EDIT/SET > CW-KEY SET
2. Touch the item to set.
(Example: Side Tone Level)
3. Touch the option to set. (Example: 80%)
4. To close the CW-KEY SET screen, push
TIP: You can set each item to its default by
touching the item for 1 second, and then
touching "Default" on the QUICK MENU screen.
Side Tone Level
Adjusts the CW side tone output level.
• Adjust to between 0 ~ 100%.
Side Tone Level Limit
Turns the CW side tone level limit ON or OFF.
This function disables the CW side tone when
you increase AF GAIN above the side tone level.
Keyer Repeat Time
Sets the time between Memory keyer
transmissions.
• Set to between 1 ~ 60 seconds.
LAfter transmitting a Memory keyer contents, the
transmission is repeated after the set time period.
is displayed, even between transmissions.
L
Dot/Dash Ratio
Sets the dot/dash ratio.
• Set to between 1:1:2.8 ~ 1:1:4.5 in 0.1 steps.
Keying weight example: Morse code "K"
Default: 1:1:3
Setting range
1:1:2.8 to 1:1:4.5
Rise Time
Sets the rise time of the transmitted CW
envelope.
• Set to 2, 4, 6, or 8 milliseconds.
Key action
TX output
power
Paddle Polarity
Sets the paddle dot-dash polarity to Normal or
. Reverse.
• Normal: Right = dash, Left = dot
• Reverse: Right = dot, Left = dash
Key Type
Sets the key type for the [KEY] jack on the side
(Default: 50%)
panel.
• Set to Straight, Bug, or Paddle.
LWhen using an external Elec-keyer, select
(Default: ON)
MIC Up/Down Keyer
Selects whether or not to use the keys on the
microphone as a CW key.
• OFF:
(Default: 2sec)
• ON (UP/DOWN):
• ON (A/B): Use the [A]/[B] keys as a CW key.
LThe microphone keys do not work as a "squeeze key."
LWhen "ON" is selected, you cannot use the function
2-6
Dot Dash
1 1 3
1 1 2.8～4.5
Setting range
TX
RX
0
Rise time
"Straight."
Do not use the microphone keys as
a CW key.
Use the [▲]/[▼] keys as a CW key.
that is assigned to each key.
(Default: 1:1:3.0)
Dash
Space
(Default: 4ms)
Set TX output power
Time
(Default: Normal)
(Default: Paddle)
(Default: OFF)