Icom IC-705 Advanced Manual page 195

15. ABOUT THE DV GATEWAY FUNCTION
Setting up the device
D When using the Internal Gateway function
Allowed Call Sign (Access Point Mode)
Selects to use the call sign restriction for the
Access Point mode. When "Enabled" is selected,
this allows only stations with registered call signs
to transmit through the Internet.
• Disable: Allows all call signs to transmit.
• Enable: Allows only the call sign entered
on the "Allowed Call sign List" to
transmit.
LWhen using the Terminal mode, select "Disabled."
Allowed Call Sign List
Enter the call sign of the stations that you allow
to transmit through the Internet while "Enabled"
is selected for "Allowed Call sign (Access Point
Mode)."
LYou can add up to 30 call signs.
Adding a call sign
1. Touch for 1 second.
2. Touch "Add."
3. Enter the Call sign, and then touch [ENT].
(Default: Disable)
15-11
Deleting a call sign
1. Touch the Call sign for 1 second.
2. Touch "Delete."
3. Touch [YES].